Epson ActionPC 1500 Manual de informações do produto - Página 10

Procurar online ou descarregar pdf Manual de informações do produto para Ambiente de trabalho Epson ActionPC 1500. Epson ActionPC 1500 11 páginas. Product information guide

Imprimir página

EPSON ActionPC 1500/2000, ActionTower 2000

Tested Operating Environments

Although your system will run most software applications,

the following operating environments have been tested for

compatibility with your system.

Microsoft MS-DOS 3.1 and later

Novell DR DOS

Novell NetWare* 2.2,3.12, and 4.01

Novell NetWare Lite

IBM OS/2

SCO UN-IX

SCO Open Desktop

Microsoft Windows 3.0 and later

Microsoft Windows for WorkGroups

Microsoft Windows NT

*Certified as workstation

Your system has also been Novell tested and approved.

new environments become available, these also will be tested.

Installation/Support Tips

Installing Diskette Drives

in the SETUP program.

diskette drive controller.

Installing Hard Disk Drives

If you are installing a drive that cannot use the embedded

IDE interface, such as an ESDI hard disk drive, it is

recommended that you use a 16-bit, AT-type hard disk

controller. If you install a non-IDE hard disk drive and

controller card, you must set jumpers J14 and J16 to

position 2-3 to disable the built-in IDE hard disk drive

interface. Also be sure to remove the hard disk drive

ribbon connector from the system board.

When installing a hard disk drive, see the hard disk drive

type tables on pages 6 and 7 and use the auto-sensing

feature in SETUP to select the correct type number for the

drive. If the auto-sensing feature does not produce a

match for the drive, you can define your own drive type

by selecting User

Def 1

entering the drive's exact parameters.

10 - EPSON ActionPC 1500/2000, ActionTower 2000 5/9/94

or User

as the type and

Def 2

Software Problems

try the installation at high speed. If this does not work

properly, select low speed by pressing Ctrl Alt - (using the

numeric keypad). Try loading the program at low speed

and then switching to high speed, if possible.

its copy-protection method, try loading it at high speed. If

this does not work, load it at low speed.

Installing Option Cards

Cl If you are installing a video adapter card that doesn't

support VGA, make sure you disable the built-in VGA by

removing jumpers J1 and J2.

COM Port Assignment

jumper J7 to position 2-3. If you want to assign COM2 as

COM4, you must set jumper J9 to position 2-3.

Information Reference List

Engineering

None.

Technical Information Bulletins

None.

Product Support Bulletins

None.