Epson ActionTower 7500 Manual de informações do produto - Página 3
Procurar online ou descarregar pdf Manual de informações do produto para Ambiente de trabalho Epson ActionTower 7500. Epson ActionTower 7500 11 páginas. Product support bulletin(s)
Também para Epson ActionTower 7500: Boletim de apoio ao produto (1 páginas), Boletim de apoio ao produto (1 páginas)
Imprimir página
Power Supply
200 Watt, UL/TUV/CSA listed, fan-cooled
Type
Input ranges
100-120 VAC or 200-240 VAC;
switch-selectable
Maximum
+5 VDC at 20 Amps, -5 VDC at 0.5 Amp
output
+12 VDC at 8 Amps, -12 VDC at 0.5 Amp
Frequency
50 to 60Hz
Cables
Two to main system board, five to mass
storage devices; for more
devices, Y cables can be installed on the
existing cables
Option slot power limits
output voltage (VDC) ) +5 volts
all slots
For
Environmental Requirements
Condition
Temperature
41° to 90° F
(5° to 32° C)
Humidity
20% to 90%
(non-condensing)
Altitude
-330 to 9,900 ft
(-100 to 3,000 m)
Jumper Settings
Miscellaneous jumper settings
Jumper
Jumper
number
setting
Function
JP4
1-2*
Selects 5V flash memory
2-3
Selects 12V flash memory
JP5
I Enables PCI IDE controller
1-2
Disables PCI IDE controller
JP11
Clears CMOS memory (resets SETUP values to
On
factory defaults)
o f f '
Normal CMOS values
JP12
1-2
Enables on-board I/O controller
l
Disables on-board I/O controller
JP15
I 1-2*
* Default setting
Parallel port ECP mode DRQ jumper settings
Function
JP13
DRQ1 (DACK1)*
1-2
DRQ4 (DACK3)
2-3
* Default setting
EPSON ActionPC/ActionTower 7000 series (including ActionTower 8400)
five
than
+12 volts
-4° to 140°F
(-20° to 60° C)
10% to 90%
-330 to 39,600 ft
(-100 to 12,000 m)
JP14
1-2
2-3
10/30/95
ActionPC/ActionTower 7000 series
* Off for DX4 (3x); 2-3 for DX2 (2X)
(including ActionTower 8400) - 3