Motorola CLP107e Manual do utilizador - Página 31

Procurar online ou descarregar pdf Manual do utilizador para Rádio bidirecional Motorola CLP107e. Motorola CLP107e 42 páginas.

Chapter 5

Radio Cloning

This feature allows you to clone radio settings from one radio to another.

5.1

You can copy the radio settings from the source to another radio.

You can use one of the following unit chargers and cables for cloning:

•

CLP Series Single Unit Charger (SUC) kit part number PMPN4018_

Cable kit part number HKKN4028_ (optional accessory).

•

Multi-Unit Charger (MUC) Kit Part Number PMPN4020_ (optional accessory)

The MUC does not have to be plugged in for cloning, but both radios require charged batteries.

5.2

Prerequisites:

•

A fully charged battery on each radio.

•

Two Single-Unit Charger (SUC) Kits.

•

Both radios are turned off.

•

Source radio: Radio to be cloned.

•

Target radio: Radio to which the configuration of the source radio is to be copied.

Figure 12: Cloning the Radio through a Single Unit Charger

Procedure:

1 Unplug any cables such as power supply or micro USB cables from the SUC.

2 Plug one side of the cloning cable micro USB to one SUC and plug the other end to the second

SUC.

Revision B onward

MN007419A01-AA

Radio Cloning

and CLP Series Cloning