Motorola DTR600 Manual de referência rápida - Página 3

Procurar online ou descarregar pdf Manual de referência rápida para Rádio bidirecional Motorola DTR600. Motorola DTR600 8 páginas.
Também para Motorola DTR600: Atualização do firmware (13 páginas)

Imprimir página

Turning the Radio On or Off

• To turn on the radio, press and hold the Power button until the radio

vibrates and the display shows Motorola Logo.

• To turn off the radio, press and hold the Power button (~3 seconds)

until the power down screen is shown and the power down tone is

heard.

Setting the Non-Interference or Privacy Feature

This feature ensures improved private communications by configuring an

appropriate PROFILE ID number.

Important: By default, the PROFILE ID number is "0000".

Ensure that all your radios are configured with the same

PROFILE ID number and is easy to remember.

1 Press Menu/OK → Advanced → PROFILE ID .

2 Enter a four-digit radio PROFILE ID number.

Transmitting Calls

Notice: Wait for the Talk Permit Tone to end and speak. If you

receive a busy tone and your radio display shows Call Failed,

the channel is either not available, busy, or there are no users

reachable within transmission range.

1 To call, press PTT button with the selected Channels/Contacts.

The display shows call screen with call type and caller ID.

2 Wait for the Talk Permit Tone to end and speak into the microphone.

Browsing and Selecting Channels

To select a channel, press the Up or Down button on the home

screen.

Battery Status Information

Battery status icon displays on the top left of the radio screen.

When the battery is on a Shutdown level, a continuous alert tone and automatically shutdown occurs.

Table 1: Battery Status

Battery Icon

Starting a Private Reply

The Programmable button is set to Private Reply feature by default.

This feature allows two people to instantly connect privately after a

group transmission is over.

Notice: There is a channel Hangtime after a Private

transmission. By default, the Hangtime is set to 10 seconds.

1 To initiate a Private Reply, press the Programmable button during a

group call.

The display shows Private Reply On.

2 After a group call, press PTT button to call privately.

The display shows Private Reply.

3 Wait for the Talk Permit Tone to end and speak.

English

Battery Status

High

Medium

Low

Critical

Shutdown