Epson Endeavor 486I Manual de informações do produto - Página 3

Procurar online ou descarregar pdf Manual de informações do produto para Ambiente de trabalho Epson Endeavor 486I. Epson Endeavor 486I 11 páginas. Product information guide

Epson Endeavor 486I Manual de informações do produto

Power Supply

200 Watt, UL/TUV/CSA listed, fan-cooled
Type
Input ranges
100-120 VAC or 200-240 VAC;
switch-selectable
Maximum
+5 VDC at 20 Amps, -5 VDC at 0.5 Amp
output
+12 VDC at 8 Amps, -12 VDC at 0.5 Amp
Frequency
50 to 60 Hz
Cables
Two to main system board, five to mass
storage devices; for more than five
devices, Y cables can be installed on the
existing cables
Option slot power limits
Output voltage (VDC) 1 +5 Volts

Environmental Requirements

Condition
Temperature
Humidity
(non-condensing)
Altitude
-330 to 9,900 ft

Jumper Settings

Miscellaneous jumper settings
Function
Enables on-board l/O controller
Disables on-board l/O controller
Selects 5V flash ROM
Selects 12V flash ROM
EPROM
Enables PCI IDE controller
Disables PCI IDE controller
Clears CMOS memory (resets SETUP values to
factory defaults)
Normal CMOS values
Enables on-board VGA controller
Disables on-board VGA controller
* Default setting
Parallel port ECP mode DRQ jumper settings
Function
JP8
DRQ1 (DACK1)*
1-2
DRQ4 (DACK3)
2-3
* Default setting
EPSON ActionPC 7000, ActionTower 7000, Endeavor 486i
-330 to 39,600 ft
JP18
2-3
1-2
5/19/95 ActionPC 7000, ActionTower 7000, Endeavor 486i - 3
CPU type jumper settings