Epson Equity 386SX PLUS Boletim de apoio ao produto - Página 12

Procurar online ou descarregar pdf Boletim de apoio ao produto para Ambiente de trabalho Epson Equity 386SX PLUS. Epson Equity 386SX PLUS 26 páginas. Product support bulletin(s)
Também para Epson Equity 386SX PLUS: Boletim de apoio ao produto (19 páginas), Manual de informações do produto (10 páginas), Manual de informações do produto (10 páginas), Boletim de apoio ao produto (45 páginas)

Q9.

Can any other Equity keyboards be used on this machine?

Only the Equity le. Both the Equity le and the Equity 386SX PLUS use the

PS/24-type mini-DIN connector. All other Equity keyboards use the AT-type full-

size DIN connector.

Q10. What is the logical assignment of Diskette Drives?

When the Equity 386SX PLUS is configured with two diskette drives, it will boot

from either diskette drive. If you boot the system from a diskette in the second

diskette drive, normally the 6 drive, that drive becomes drive A and the first

diskette drive, normally drive A, becomes drive B. This assignment remains in

affect until the system is reset with the reset switch, turned off, or is rebooted

from the drive currently designated as drive B or the AFDD.EXE utility on the

Reference Diskette is run (the use of AFDD is described later). Therefore, the

drive assignments can be controlled in two ways:

1. Boot the computer from a diskette in the drive you want

assigned as drive A.

2. Run the AFDD program to reverse the current drive

letter assignment.

The current logical drive assignments remain in effect when the system is

rebooted from the hard disk by pressing CTRL- ALT-DEL. The drive

assignments are lost if the system is turned off or reset with the reset button.

To use the AFDD utility, type AFDD at the command prompt and the following

message appears on the screen:

Reassign FDD utility Version XXX

New Assign

Drive A: 1.2MB <== 1.44MB

Drive B: 1.44MB <== 1.2MB

(S)et and Reboot, Any other key to Abort ? _

if you press S, the drive letters are switched and the system reboots with the

new assignments in effect. Pressing any other key aborts the operation and

returns to the command prompt.

PSB No: S-0131

Page: 3 of 9

Present