Motorola WAVE TLK 100 Manual - Página 36

Procurar online ou descarregar pdf Manual para Rádio bidirecional Motorola WAVE TLK 100. Motorola WAVE TLK 100 49 páginas.
Também para Motorola WAVE TLK 100: Manual do utilizador (36 páginas)

Imprimir página

MN005173A01-AD

Chapter 12 : Menu

At the fringe areas of reception, both voice and tone quality start to sound "garbled" or "broken". To

correct this problem, position your radio and Bluetooth-enabled accessory closer to each other (within

the 10 m defined range) to re-establish clear audio reception. The Bluetooth function of your radio has

maximum power of 2.5 mW (4 dBm) at the 10 m range.

Your radio can support up to three simultaneous Bluetooth connections with Bluetooth-enabled

accessory of unique types. For example, a headset, a scanner, a sensor device, and a PTT-Only

Device (POD). Multiple connections with Bluetooth-enabled accessory of the same type are not

supported.

Refer to the user manual of your respective Bluetooth-enabled accessories for more details on the full

capabilities of your Bluetooth-enabled accessory.

12.8.1

Turning Bluetooth On or Off

NOTE: Depending on the configuration of your radio, press or press and hold the Menu/

Programmable button to directly access the feature. Else, manually enter the feature with the

following procedure.

Procedure:

1 Press the Menu/Programmable button.

2 Locate the Bluetooth icon.

3 To turn on Bluetooth, press the Volume Up button. To turn off, press the Volume Down button.

If Bluetooth is on, the following occurs:

•

Voice Announcement sounds Bluetooth On.

•

The display shows a check mark beside the Bluetooth icon.

If Bluetooth is off, the following occurs:

•

Voice Announcement sounds Bluetooth Off.

•

The display shows an "X" mark beside the Bluetooth icon.

12.8.2

Searching for Bluetooth Devices

Procedure:

To search for other Bluetooth devices, press the Power/Info button until you see the Bluetooth

icon.

The radio displays Bluetooth Searching icon and Voice Announcement sounds Bluetooth

Searching.

12.8.3

Connecting to Bluetooth Devices

Procedure:

1 While searching, the radio search for the last connected Bluetooth accessory.

Once connected, an indication tone sounds from the connected Bluetooth accessory.