Motorola VM50G-2 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Monitor de bebé Motorola VM50G-2. Motorola VM50G-2 32 páginas. 5.0" video baby monitor
Também para Motorola VM50G-2: Manual de início rápido (2 páginas)

Imprimir página

2.2

Parent Unit Power Supply

IMPORTANT

The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-

ion battery 2000mAh, to give up to 5 hours monitor operation), please charge it

for 16 hours before initial use. The battery is not a user-accessible item. Please

contact the helpline if you think it needs replacing.

1. Connect the small plug of the power adapter to the Parent Unit and the

other end to a suitable mains power outlet. Only use the enclosed power

adapter (5V DC / 1000mA) with the small plug.

2. Press and hold the

the Parent Unit.

3. Once the Baby and Parent Units are switched on, the display on the Parent

Unit will show the color video captured by the Baby Unit, but if the baby's

room is dark, the video will display in black and white, with a

showing, due to the infra-red illumination by the Baby Unit.

4. If there is no connection or you are out of range, the video display will go

off, a

symbol will appear on the screen, and the Parent Unit will beep

repeatedly. Move the Parent Unit closer to the Baby Unit until the link is

re-established.

5. Press and hold the

finishes scrolling, to turn OFF the Parent Unit.

NOTE

The battery icon

parent unit will beep every 15 seconds. The battery needs to be recharged; it

will take16 hours to charge fully.

Getting Started

POWER ON/OFF button for 3 seconds to turn ON

POWER ON/OFF button, until the progress bar

turns RED to indicate that the battery is low, and the

icon