Motorola AXH01 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Telefone sem fios Motorola AXH01. Motorola AXH01 49 páginas. Wireless home telephone with alexa built-in
Também para Motorola AXH01: Manual de início rápido (23 páginas), Manual de início rápido (25 páginas)
Imprimir página
Important
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-
MH 750mAh rechargeable batteries) supplied with your Motorola AXH01.
Battery low warning
If you hear a warning beep every 60 seconds during a call, you will need to
recharge the handset before you can use it again.
When charging,
Battery performance
In ideal conditions, fully charged batteries should give up to 17.5 hours talk
time or up to 300 hours standby time on a single charge.
Note that new batteries do not reach their full capacity until they have been
put to normal use for several days.
To keep your batteries in the best condition, leave the handset off the charger
for a few hours at a time.
Running the batteries right down at least once a week will help them last as
long as possible.
The charge capacity of rechargeable batteries will reduce with time as they
wear out, giving the handset less talk / standby time. Eventually they will need
to be replaced.
After charging your handset for the first time, subsequent charging time
is about 6–8 hours a day. Batteries and handset may become warm during
charging. This is normal.
1
All talk and standby times are approximate and depend on features selected
and usage pattern.
Date and time
The date and time is set automatically when registered to the base. You can
change the date and time format to show MM/DD or DD/MM and 12 hours or
24 hours.
Note
The phone can be set so that the base or handset can be the clock master,
once set this will sync across all handset. If you have the handset set to clock
master as well as changing the format you can set the date and time manually.
1.
Press Menu, scroll u to
2.
Date/Time
is highlighted. Press Select.
3. To change the date format, scroll
MM/DD
select either
u
4. Scroll
to
Enter
27 August 2019 and press Ok.
5. Once the date is set, to change the time format, scroll
and scroll t or u to select either
Getting started
will scroll on the display.
Clock & Alarm
or DD/MM.
Date, enter the date, e.g. when set to MM/DD, 08/27/19 for
and press Select.
d
to
Date Format
12 Hours
24
Hours.
or
1
and scroll t or u to
d
Time Format
to
9