Motorola D1101 Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Telefone sem fios Motorola D1101. Motorola D1101 2 páginas. D1100 series
Também para Motorola D1101: Manual do utilizador (46 páginas)

Motorola D1101 Manual de início rápido
D1100 / D1110 Series
Quick Start Guide
1

Getting started

2
Using the phone
3
Help
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, a full user guide is available
to download in PDF format from:
www.motorola.com/cordless-phones
Please consider the environment before printing.
D1100
Digital cordless phone
D1110
Digital cordless phone with answering machine
Getting started
Step 3. Charge the handset
• When the handset is fully
charged, plug the telephone line
• Insert the 2 x AAA NiMH
cord into the socket marked
batteries supplied into the
on the underside of the base
handset and slide the battery
and plug the other end into the
compartment into place.
telephone wall socket.
• Place the handset on the
charger and charge for at least
Warning!
24 hours. When the handset is
Use only rechargeable batteries.
fully charged, the
icon is
If non-rechargeable batteries
displayed.
are used
WRONG BATTERY
will
be displayed and charging will
be stopped. Please replace with
rechargable batteries.
Box Contents
D1101 / D1111
D1101 base or D1111 base
handset
Mains power
Telephone line cord
adaptor for the base
with clear connector
D1100 / D1110 Series
Quick Start Guide
1
Getting started
2
Using the phone
3
Help
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, a full user guide is available
to download in PDF format from:
www.motorola.com/eu/radios/technicaldocumentation.
Please consider the environment before printing.
Digital cordless phone
D1100
Digital cordless phone with answering machine
D1110
2 x AAA NiMH
Screws and
Quick Start
rechargeable
wall plugs for
Guide
batteries
wall mounting
Step 4. Select country
Step 5. Set Date and Time
• After charging your phone, the
• Press Menu and scroll
Welcome screen appears.
to Clock & Alarm then
press Select.
• A list of countries is displayed in
the Welcome screen.
• Date & Time is highlighted.
Press Select.
• Scroll
or
to your
country and press Select.
• Enter the date using the format
DD/MM/YY.
The handset and base will be reset
to load the correct settings and the
• Enter the time in 12 or 24 hour
standby screen is displayed.
time format. Press Save.
• Press
or Back until you
return to standby.
NOTE
If you have subscribed to your
network's Caller Display service, the
date and time is set automatically
for all handsets every time a call is
received.
Your phone is now ready for
use.
If you have purchased a multiple
Important
pack you will also have the
Only use the telephone line cord
following additional items:
supplied. This equipment is not
designed for making emergency
D1102/D1112
telephone calls when the power
• 1 x Additional handset and
fails. Alternative arrangements
charger
should be made for access to
emergency services.
• 2 x AAA NiMH rechargeable
batteries
• 1 x Mains power adaptor for
Warning!
charger with red connector.
Use only rechargeable batteries.
D1103/D1113
• 2 x Additional handsets and
chargers
• 4 x AAA NiMH rechargeable
batteries
• 2 x Mains power adaptors for
charger with red connector.
D1104/D1114
• 3 x Additional handsets and
chargers
• 6 x AAA NiMH rechargeable
batteries
• 3 x Mains power adaptors for
charger with red connector.
Handset
Earpiece
or
Display
Option button
(left)
Press to open the Menu.
Press to select options displayed
on screen.
Talk / Handsfree
In standby mode, press to make
and receive calls.
In talk mode, press to switch
handsfree on and off.
Navigator glow ring
lluminates when the phone is
in use. Flashes to indicate new
event, eg. missed call.
*
star key
Press and hold to switch between
Tone and Pulse dialling.
Int (Intercom)
Used to make internal calls.
R (Recall)
For use with switchboard/PBX.
Getting started
Step 1. Set up the base
• Plug the mains power cable
(with a clear connector) into
the socket marked
on the
underside of the base and plug
the other end into the mains
power wall socket.
• Switch on the power supply
Tip
Position the base at least 1
metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
Display icons
Displayed in standby mode to indicate handset is in range of the
Redial / Up
base.
In standby, press to open and
Flashes if you move out of range.
scroll through the redial list.
In talk mode, press to adjust the
Displayed if ECO Mode is switched on
volume.
Handset ringer volume is Off.
In menu mode, press to scroll
through the options.
Displayed in handsfree talk mode.
When storing an entry in the
phonebook, press and hold to
Answering machine is On. (for D1110 only)
enter a Pause.
The alarm is set to On.
Option button (right)
In standby, press to open the
The keypad is locked.
Phonebook menu.
You have answering machine (TAM) messages. (for D1110 only)
Press to select options displayed
on screen.
You have text messages.*
Phonebook / Down
You have voicemail messages.*
In standby, press to open and
scroll through the Names list.
You have missed calls.*
In talk mode, press to adjust the
volume.
The approximate power levels of your battery are indicated as below:
In menu mode, press to scroll
through the options.
Battery is fully charged.
End call / Power on / off
Battery is partially charged.
Press to end a call.
Battery is running low.
In menu mode, press to return
to standby.
Battery is almost fully discharged (Red).
In standby, press and hold to
* For this feature to work, you must subscribe to your network provider's
switch the handset off. When
off, press to switch the handset
Caller Display service. A quarterly fee may be payable.
back on.
NOTE
# / Lock
When the memory for TAM or text messages is full,
Press and hold to lock the keypad.
will appear below their corresponding reminder icon.
To unlock, select Unlock and follow
the on screen instructions.
Important
The base station must be plugged
into the mains power at all times.
Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
Step 2. Connect the charger
(Multi-pack only)
• Plug the mains power cable
(with a red colour connector)
into the socket marked
on
the underside of the charger
and plug the other end into the
mains power wall socket.
• Switch on the power supply.
an exclamation mark