Motorola MCS 2000 II Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Rádio Motorola MCS 2000 II. Motorola MCS 2000 II 20 páginas.

Imprimir página

Monitor

Press the monitor button to toggle monitor on or off.

Press and hold the monitor button to enter squelch

conﬁguration. Using the mode selector (D), the

squelch level of the radio may be ﬁne-tuned. Press the

select key when the desired level is attained.

User-Selectable Private Line (PL)

User Selectable Private Line (PL) allows the radio user

to select a PL code from a pre-programmed list of

codes. Press the Multiple Privale Line (MPL) button (if

programmed) to view the current PL or press and hold

the MPL button to enter MPL conﬁguration. Use the

mode selector to change the PL code and press the

select key when the desired PL is displayed.

Stat Alert (MDC - 1200/Star Signalling)

Features

PTT ID and Emergency

Each radio can be programmed to send a unique dig-

ital identiﬁcation code at the beginning of each trans-

mission, at the end, or both. When the PTT-ID is

programmed to come before voice transmission, you

will hear a tone until the ID transmission is complete.

This ID may be combined with an emergency alarm

MCS 2000 Models II & III

that is activated by an emergency button on the radio.

The dispatcher can quickly identify the radio user in

an emergency situation.

Emergency Operation

Emergency is operated as previously described.

Selective Calls

Receiving a Selective Call

The radio will display

CALL RECEIVED

ID: 2000

for two seconds upon receiving a Selective Call. You

can enter Selective Call to view the ID of the calling

radio and to respond with a Selective Call (see below).

Sending a Selective Call

Press the call button (12) or select the menu PRIVATE

CALL as previously described. Enter the ID via the

keypad or use the mode selector (D) to scroll to the ID

you wish to call. Press the PTT (F) to transmit the

selective call to this ID. If automatic Selective Call is

disabled, the radio exits Selective Call after the trans-

mission. If automatic Selective Call is enabled, the

radio will remain in Selective Call until you exit.

CALL RECEIVED

68P81083C49-B

page 13