Motorola Pro3100 Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Rádio Motorola Pro3100. Motorola Pro3100 29 páginas.

SCAN

Your radio can monitor multiple channels in a

scan list. Your dealer can program up to four

different channels into each scan list. When

your radio detects activity on a scan list

channel, it will automatically switch to that

channel.

Note: The same channels can be assigned to

different scan lists.

The green LED indicator blinks during a scan

operation and stops blinking when the radio

switches to a channel.

You can start or stop a scan operation by:

pressing the preprogrammed Scan button (see

page 4).

The Talkback feature allows you to respond to a

transmission while scanning. If transmission is

detected on a channel while scanning, the radio

will stop on that channel for a preprogrammed

period of time. During this "hangtime" you may

respond by pressing the PTT.

Note: If transmission ceases or if the PTT is

not pressed for a preprogrammed

duration, the radio continues to scan.

The LED scan indicator stops blinking

while the radio is in hangtime.

If a channel continually generates unwanted

calls or noise (a "nuisance" channel), use the

Scan button to temporarily delete the channel

from the scan list.

Note: You cannot delete a priority channel or

the last remaining channel in a scan list.

1 While the radio is on the nuisance channel, hold

Scan

down the

button until you hear a tone.

Scan

2 Release the

button. The nuisance

channel is deleted.

English