Epson LABELWORKS LW-1000P Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Fabricante de etiquetas Epson LABELWORKS LW-1000P. Epson LABELWORKS LW-1000P 2 páginas. All-rounded, quality label printing solutions on the go
Também para Epson LABELWORKS LW-1000P: Brochura e especificações (4 páginas), Manual de instalação (2 páginas)

Imprimir página

Using the Printer

Printer Setup

1. Connecting the power cable

CAUTION

Always use the AC adapter provided.

Connect the AC adapter provided (AST1527Z1-1) to

the printer, and plug the power plug into a power

outlet.

Auto power-o

The printer's power turns o automatically when the

printer has not been used for about 8 hours.

Determining the computer connection method

The printer supports wireless LAN connection, wired LAN connection and USB cable connection.

The connection method will vary according to the environment it is installed in. Use the owchart below to carry out the connection procedure.

Start

Can the computer to be connected to the printer be

connected to the Internet?

Yes

Does the computer have a wireless LAN function?

Connect the printer with a USB cable.

s Label Editor User's Guide

Is there a broadband router or access point, and is a

wireless LAN function supported?

Yes

Connect the printer on a Wireless LAN (Infrastructure

Mode).

Does the access point have a WPS button?

Yes

Use the push button auto-connection function to set

the connection.

s Network Con guration Guide

"Con guring settings for a wireless LAN using

automatic push button con guration (WPS)"

Creating a Label

1. Creating a label

Create a label using software such as EPSON Label

Editor or iLabel.

Backing paper

MEMO

Epson has a variety of custom tapes available for

many di erent applications.

For more information, see the Supplies Catalog

provided with the printer. s Supplies Catalog

2. Printing a label

When using a computer

Click the Print icon.

When using a smart device

Tap the Print icon.

Select the LW-1000P.

This section describes all the procedures from printer setup to printing and attaching a label.

The descriptions of computer connection and other procedures are for Windows.

If using the Mac, refer to the "Label Editor Lite for Macintosh User's Guide."

2. Inserting the tape cartridge in the printer

CAUTION

Always perform the tape feed operation

after inserting a tape cartridge in the

printer.

Remove any slack in the tape inside the

tape cartridge.

Use a pen or

a pencil.

Press the

button to open the top cover.

MEMO

Wireless LAN connection, wired LAN connection and USB

connection can be used at the same time in any combination.

Yes

Connect the printer on a Wireless LAN (Simple AP Mode).

s Network Con guration Guide

"Setting up a wireless LAN connection (Simple AP Mode)"

If a LAN cable is connected to the computer, a wired LAN

connection can be used.

s Network Con guration Guide

"Con guring settings for a wired LAN connection"

Use one of the following methods to set the connection:

• Use a PIN code to set the connection

• Set the connection manually

s Network Con guration Guide

"Wireless LAN settings using a PIN code (when

automatically acquiring the IP address from the printer)",

"Setting the IP address for the printer manually"

3. Attaching a label

Peel o the backing

Attach the label and rub it

paper.

rmly.

MEMO

If you set the tape cutting method to "Half cut", only the label

surface is cut when several labels are printed consecutively,

making it easier to peel o the labels.

See the Label Editor User's Guide for the detailed procedures.

s Label Editor User's Guide

Cutting rounded label corners

You can use the auto-trimmer to

round o label corners.

Insert the tape in the tape

insertion slot, following the

guide.

The tape is cut to form rounded

label corners.

Place a tape cartridge in the printer as

shown.

Pass the end of the tape

through the gap.

Close the top cover.

Perform the tape feed operation.

1) Press the

button to turn the printer

power ON.

2) Press the

button.

Connecting a Mobile Device

MEMO

• For details of how to operate a particular mobile device, read the instruction manual for each device.

• For the SSID, password, etc. of the access point, read the instruction manual for each device or contact the network administrator.

• Checking the printer setting contents

When you press the

Connecting to a printer one-to-one (Simple AP Mode)

Connecting manually

Select the SSID of the printer and connect.

Press the

button on the printer until the

starts ashing to set the printer connection mode to Simple

AP mode.

Enable Wi-Fi on the mobile device.

From the network list, select the SSID of the printer and then

enter the password on the password entry screen.

Default setting upon purchase:

SSID:

DIRECT-LW-1000PXXXXXXXXX

Password:

12345678

Connecting to a printer connected to the network

Connecting manually

Select the SSID of the access point and connect.

Enable Wi-Fi on the mobile device.

From the network list, select the SSID of the access point and

then enter the password on the password entry screen.

Troubleshooting

This section describes how to resolve printer operation and label printing problems.

See the Network Con guration Guide for how to deal with network settings or

connection problems.

Printer's

button does not light.

Check that the power cable is properly connected. If the

not light, contact your place of purchase or the Epson customer support

center.

Printer does not print when print operation is directed.

• If a message is displayed on your computer screen, check the message

information.

• Check that connection cables are connected properly, that the tape

cartridge is mounted properly, and that the cover is closed properly.

• Have you selected the printer to be used? Printing will not be done

properly if another printer is selected.

• Did you restart the computer after installing the printer driver? The printer

driver may not be installed correctly if the computer was not restarted.

Reinstall the printer driver.

Text is not printed properly.

• Check that the tape cartridge is properly mounted.

• Print at a low speed. Change the setting in the printer settings of the

printer driver.

Lines appear on printed labels.

The print head is dirty. Clean the print head.

Canceling a print job

Check the printer's power in ON, then press the

the printer brie y once.

Downloading Printer Driver and Software

Download the Epson software necessary to create labels on your computer or mobile device, and to print them from

the printer.

Mobile Device

Where to download the software

Epson Applications (Install the following applications.)

• Epson iLabel

• Epson Datacom

Computer

The following pieces of software are necessary to use the printer from your computer.

• Printer driver /Network setting tool

• Label editing software

• User's Guide of the label editing software (as needed)

Windows

Mac

Download them from your local Epson website.

• Printer driver/User's Guide of the label editing software

Search the software by its name "Label Editor".

Download them from your local Epson website.

U http://www.epson.com

Search the software by its name "Label Editor Lite".

U http://www.epson.com

• Label editing software

Available on the App Store.

Search the software by its name "Label Editor Lite", then

install it.

button on the printer for 3 seconds or more, a label is printed indicating the current settings.

Connecting with WPS

This can be set when a mobile device supports WPS.

Press the

lamp

starts ashing to set the printer connection mode to Simple

AP mode.

Enable Wi-Fi on the mobile device and then tap the WPS

push button.

Press the

Connecting with WPS

This can be set when a mobile device supports WPS.

Enable Wi-Fi on the mobile device and then tap the WPS

push button.

Press the WPS button on the access point.

Labels are not cut automatically

• Check if the cut setting is set to "Don't cut" in the printer settings of the

button still does

Label Editor software. s Label Editor User's Guide

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Half cut function doesn't work properly.

• Is the printer set to "Half cut" or "Don't cut"? Check the settings.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Trimmer doesn't cut properly.

• Is the printer printing? The trimmer doesn't operate during printing.

• Was the label inserted properly in the trimmer tape insertion slot? Insert

the label into the slot following the guide.

• Is the printer clogged with tape scraps? Remove the trimmer cover, and

remove the tape scraps.

• Are you using 6 millimeter-wide tape? You cannot cut 6 millimeter-wide

tape with the trimmer.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

button on the front of

button on the printer until the

lamp

button on the printer.