Epson LABELWORKS PX LW-PX300 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Epson LABELWORKS PX LW-PX300. Epson LABELWORKS PX LW-PX300 2 páginas.
Também para Epson LABELWORKS PX LW-PX300: Manual do operador (14 páginas)

Imprimir página

LABELWORKS PX

LW-PX300

User's Guide

Read this document carefully to use this product safely

and correctly. If your product is faulty, please read

the included warranty card and contact the store you

purchased it from. If you require further assistance,

contact your local K-Sun customer support center.

Please also visit us at http://labelworks.epson.com for

English

help and support. You can download the latest version of

this User's Guide from the website.

Included Items

Before using the printer, check that you have all the items below.

Contact your place of purchase if anything is missing or damaged.

Full kit

Lite kit

PX tape cartridge

LW-PX300

(with rubber guard attached)

AC adapter

Documents

Part Names and Functions

1. Power,

: To "Print density" menu.

2. Font

3. Font size

4. Frame

5. Style

6. Setting

7. Character keys

8. Shift

9. Caps Lock

+ : Capitalizes the entered characters.

10. Accent

11. Space

12. Shift

13. Select/Enter

14. Punctuation: A choice of marks.

: The other choice of marks.

sAdding a punctuation mark to the label

15. Delete,

: Deletes text.

16. Symbol,

: To "Sequence number" menu.

17. Special label,

: To "Bar code" menu.

18. Print copies

19. Preview,

: The "Display" menu.

20. Cursor keys

To the previous or next text.

21. Print,

: Feeds the tape.

22. Cut Button

23. Display

Display

You can check settings on the display. Indicators show

1. Font size

2. Font width

whether or not settings are enabled.

3. Frame

4. Font style

2 3 4 5

5. Vertical

6. Battery level (as a guide)

7. Accent mark options

8. Upper case/lower case

9. Cursor: Indicates the position where the operation is

performed. This is the place where you enter text or

delete symbols, etc.

10. Head mark: Indicates what line it is in. Appears when

multiple lines exist.

MEMO

: If this appears, you cannot print anything.

11. Text number mark: Indicates the number of the

current text counted from the beginning.

Specifications

Body

Power supply

Dimensions Approx. 110 (W) x 170 (D) x 56 (H) (mm)

AC adapter Type

APT0615Z2-1

Weight

Approx. 400g (excluding batteries, tape cartridge)

Manufacturer Seiko Epson Corp.

Input

AC100-240V, 0.3A, 50-60Hz

Usage conditions

(dedicated adapter, power cable only)

Operating temperature

10 to 35 degrees C

Output

DC6.5V, 1.5A

Storage temperature

-10 to 55 degrees C

Total output

10W

power

Supported tape width

Battery

AA alkaline battery x 6

6 mm, 9 mm, 12 mm, 18 mm

Printed in China

Before use

1. Preparing the power supply

2. Installing a tape cartridge

This product operates on batteries or with the dedicated

If the rubber guard is attached, remove it. Attach the

AC adapter.

rubber guard after installing the tape cartridge.

Using on batteries

Prepare six AA alkaline batteries.

If the rubber guard is attached, remove it. Attach the

rubber guard after inserting batteries.

1. Remove the cover on the rear.

2. Insert the batteries.

Do not reverse

polarity.

MEMO

When continuing to install a tape cartridge, leave the

cover off and go to Step 2.

3. Close the cover. Close it until it snaps into place.

How to remove the tape cartridge

Using with the AC adapter (APT0615Z2-1)

PX tape cartridge

Make sure to use the specified AC adapter

(APT0615Z2-1).

1. Connect the AC adapter firmly into the power socket

of the product.

2. Plug the AC adapter into the outlet.

3. Turning the power on

4. Feeding the tape

Troubleshooting

Messages

Insert Tape

No tape cartridge is installed. Turn the power

Text will be

off and install a tape cartridge correctly.

deleted. OK?

Check tape!

A tape cartridge which cannot be used in this

product has been set. Check the tape cartridge.

Fill every digit

Check tape

A tape cartridge which cannot be used in

cartridge

this product has been set. Check the tape

Load wider tape Unable to print on the current tape. Use a

cartridge.

Check battery

Possible causes for this message are:

Txt is too long

• No power remaining or inserted in the

Continue?

wrong way

• Mixed with other types or old ones

Overheated!

If so, set the batteries correctly or replace

them with new ones.

Too many lines

Text entered is too long.

Cover open!

Press

to delete the lines indicated by

Powering off.

the cursor.

Text too long

Entered text is too long for the specified tape

length. Press

and adjust the tape length

Motor error!

or make text shorter.

Seq. num. only 1 Sequence numbers have already been set.

Sequence numbers can be used for one part only.

Problems

Does not operate normally.

Characters are not printed properly.

Initialize this product if it does not operate normally such as the

Is the tape cartridge correctly set?

power cannot be turned on or off, or the display is interrupted.

Set the tape cartridge correctly.

No image comes out even though

has been

Is the printhead dirty?

Clean the printhead.

pressed.

Did the batteries run out?

Are the batteries correctly set?

Replace them with new ones, or use the dedicated AC adapter

Check if all the batteries are correctly set.

(APT0615Z2-1).

Did the batteries run out?

Printing ends in the middle of text.

Replace the batteries with new ones, or use the dedicated AC

adapter (APT0615Z2-1).

Did the tape run out?

Install a new tape cartridge.

Is the AC adapter securely connected?

Connect the AC adapter and the power cable firmly to the

Did the batteries run out?

power socket of the product, the AC adapter connector and the

Replace them with new ones, or use the dedicated AC adapter

outlet.

(APT0615Z2-1).

Are you using an AC adapter other than the dedicated one?

Created text has gone.

Using an AC adapter other than the dedicated one (APT0615Z2-1)

is very dangerous, and may cause overheating or damage to the

Did you delete the text?

electric circuits.

Is the display level appropriate?

Did you initialize the product?

Adjust the display level.

If the product is initialized, all the created text will be deleted.

Display has turned off.

Did you remove the batteries or the AC adapter when the

product was in operation?

Did you enable the auto power-off function?

If the AC adapter or the batteries are removed during operation,

The power turns off automatically if no operation is made for

the text may be deleted.

more than 5 minutes.

Cannot attach the label.

Did you try to carry out a function incorrectly?

If buttons are operated incorrectly, the display turns off for a

Did you peel the backing paper?

moment.

Attach the label after peeling the backing paper.

Nothing is printed even though

has been

Are you attaching it on a dirty place or on a place with a rough

pressed.

surface?

The label may not adhere due to the material of the attachment

Is text entered?

location or the environmental conditions.

Nothing is printed if no text is entered.

Any message on the display?

Read the message and take the appropriate action.

Did the tape run out?

Install a new tape cartridge.

Did the batteries run out?

MEMO

Replace the batteries with new ones, or use the dedicated AC

If none of the above has solved the problem or the

adapter (APT0615Z2-1).

symptom is other than the above, contact the K-Sun

Is the cover on the rear open?

customer support center.

Set the tape cartridge correctly and close the cover completely.

After setting a tape cartridge, make sure to feed tape.

1. Press

2. Press

1. Remove the slack of the ink ribbon.

3. Cut the tape.

Cut it by pressing the "Cut Button".

5. Creating a label

Example: ABC

1. Press

while holding down

capital letters.

2. Press the following keys:

"ABC" appears on the display.

2. Remove the cover on the rear.

Refer below for other operations and the labels you

can create with this product.

sEditing characters, Useful functions, Creating a

label with a special form

6. Printing labels

1. Press

The length of the label to print and the number of

prints appear, and printing starts.

2. When the tape stops, press the "Cut Button" to cut

3. Set the tape cartridge.

the tape.

Press it firmly until it snaps into place.

When installing a new tape or the tip of the tape is

Do not press the "Cut Button" before printing is

longer than usual, put the tape through the "Tape

complete.

Guide" slot.

Printing multiple copies

1. Press

2. Select "Copies" with

, and press

3. Enter a value with number buttons and press

4. When the tape stops, press the "Cut Button" to cut

the tape.

A "cut mark" will be printed. Cut the tape with

scissors.

• Do not press the "Cut Button" before the tape stops.

Cutting labels one at a time

• Do not pull the tape out with your fingers.

1. Press

4. Close the cover on the rear.

2. Select "Set cut mode" with

Close it until it snaps into place.

3. Select "Each label" with

4. Select "Copies" with

, and press

5. Enter a value with number buttons and press

Hold the tape cartridge by the tabs, and lift it

straight up.

Printing starts.

6. When "Press cut button" displays on the display,

press the "Cut Button".

Printing starts for the second label.

Adjusting print density

1. When the power is off, press

2. Adjust print density with

MEMO

In general, please set the value to the default; "0".

7. Attaching labels

1. Peel off the backing paper.

1. Press

2. Attach the label and rub it firmly.

When changing the language of messages on the

Turn the power off after use

display sDisplay Settings ("Display" menu)

1. Press

Batteries:

Take them out if not in use for a long time.

Do not press the "Cut Button" before the tape

AC adapter:

stops.

Disconnect from the outlet and the product.

Display Settings ("Display" menu)

The following are the settings to make operation easier.

Backlight

When creating a label with a special form,

current text will be deleted. Press

to delete

Turns the backlight of the display on or off.

the text and show the special form.

Backlight: On/Off

Entered values for barcodes are wrong. Check

Contrast

the entries about values, digits, etc.

Adjusts the density of the fonts on the display.

Value: -5 to +5

wider tape.

Language

Entered text is too long for the specified tape

Selects the language of the settings and messages on

length. Press

to print in the correct length.

the display.

The printhead is too hot. Turn the power off

Language: English/Spanish/French/Portuguese-Br/

and take out the tape cartridge. Wait for a

Portuguese-EU/ Italian/Dutch/German

while before start printing again.

inch:cm

If you open the cover on the rear without

Selects the unit to indicate the length.

turning the power off, a message is

Value: inch/cm

displayed and then the power is turned off

automatically.

Procedure

An error occurred in the motor operation.

1. Press

Turn the power off once, then turn it back on.

2. Select a setting item with

If the same message appears, turn the power

off and contact the K-Sun customer support

3. When the options of the selected item appear,

center.

select your choice with

Initializing this product

The product may stop functioning due to static

electricity or other causes.

initialize the product if it does not operate normally such

as the display is interrupted.

initialize the product. Take extreme care before

initializing it.

All the created text will be deleted. The settings

you made for character input will return to the

default.

1. Press

2. Press and hold

, and press

3. When a message appears, press

The product will be initialized.

To abort: Press any button other than

are pressed, the text on the display will be deleted.

Cleaning

When the exterior is dirty

Wipe the dirt off with a soft cloth. If it is very dirty, use a

cloth wrung out of water.

Never use chemicals or solvents such as benzine,

thinner, or alcohol, or use a chemical duster.

When the printhead is dirty

If the print becomes faint or

some parts are missing, there

may be some dirt on the

printhead.

Clean the print head with a

cotton swab moistened with

medical alcohol (commercially

available ethanol).

Editing characters

Press character keys and enter text.

Adding characters with an accent mark

sPart Names and Functions

to the label

Text is entered from the cursor position. sDisplay

If there is a choice of characters with an accent mark, they

To keep the already entered text, first move the

are indicated on the display.

cursor to a number to which no text is entered yet

Example: École

with

, then enter text.

1. Press

2. Press .

Switching upper case or lower case

A choice of characters with an accent mark appears.

to enter text in

1. Press

+ .

3. Select an item with

The setting is indicated on the display. Characters

Go on and enter the next character.

are set to upper case or lower case.

To capitalize partially: Enter with

pressed.

Deleting characters

Characters with an accent mark

sSymbol List on the back of this sheet

1. Press

Adding a punctuation mark to the label

Deletes one character backward.

Select from the following two methods.

Breaking lines

1. Press

Each press shows the next mark.

Breaks the line from the character next to the

Available marks

cursor.

Deleting text

1. Press

2. When a confirmation message appears, press

Each press shows the next mark.

Text will be deleted.

Available marks

Confirming text

1. Press

Text appears on the display.

You can check the text and the length of the label.

But the print image cannot be confirmed.

Useful functions

This section explains various functions that will help you

Using extra large font

create labels.

You can create labels with characters larger than the

Changing the font size

largest font size set with

1. Press

1. Perform the following settings.

, and press

2. Select a line layout with

, and press

"Auto": Applies the same font size. No need to

proceed to Step 3.

3. Select a font size with

, and press

Changing the font

1. Press

indicator appears on the display.

2. Select a font with

, and press

The font used for the entire text will change.

2. Enter text.

Adding a frame

1. Press

2. Select an item with

Entering the frame No. to select does the same.

Available frames

sSymbol List on the back of this sheet

Applying a font style

Specifying the label length

1. Press

If the font size is set to "Auto", the font size will adjust

2. Select a style with

, and press

automatically allowing you to create labels of a specified

length.

Styles applied to small or elaborate characters may

1. Press

not be able to print clearly.

2. Select "Label length" with

Normal

Italic

Bold

3. Select a value with

"Auto": Adjusts to the proper length automatically.

Outline

Shadow

S+O

4. Select a text alignment setting with

press

5. Press

B +I

O + I

S +I

6. Select "Auto" with

7. Enter text.

S + O + I

, and press

Creating a label with a special form

To create labels with a special form, a message

3. Select a value with

confirming that the text will be deleted may

press

appear when

is pressed. Press

to delete

Maximum length: 12.5cm (5.0 inch)

the current text and to show the special form.

4. Enter text.

MEMO

To exit the following special form mode, press

then select the "9.Exit" and press

Labels wrapping a cable

Creating an folder tab label

1. Press

2. Select "7.Wrap" with

3. Select a value with

press

1. Press

Maximum length: 12.5cm (5.0 inch)

2. Select from "1.Tab:Medium", "2.Tab:Small" or

4. Enter text.

"3.Tab:Large" with

, and press

3. Select a value with

or enter label length, and

press

Creating a ribbon

Maximum length: 12.5cm (5.0 inch)

4. Enter text.

Creating a label for cables

Flag labels wrapping a cable

1. Press

2. Select "8.Ribbon" with

1. Press

3. Select a value with

2. Select from "4.Flag:Hori.", "5.Flag:Vert." or "6.Flag:Edge"

with

, and press

4. Enter text.

Adding a symbol to the label

1. Press

2. When the category appears, select an item with

, and press

3. When symbols appear, select a symbol with

, and press

Available symbols

sSymbol List on the back of this sheet

Creating labels with serial numbers

, and press

(Sequence number)

1. Press

2. Enter a number/alphabet for the first label, and press

The number/alphabet increases by one whenever

printing is done.

Creating pieces of text

You can create multiple pieces of text continuously. Up to

50 pieces can be created at a time.

You can check which piece of text you are creating with

the text number mark displayed at the beginning.

Creating another piece of text

1. Select the next text number mark with

You can create another piece of text. Do the same

for the next pieces.

Printing a selected piece of text

1. Select a piece of text you want to print with

2. Press

Changing the layout

1. Press

2. Select "Layout" with

, and press

3. Select a layout option with

• The number of lines: "1 Line"

MEMO

• Font size: "Auto"

To apply the "Justify" layout option, change the "Char.

• Font: "SansS.", "SansS.HG", "CL Roman", "BR"

spacing" setting to "Wide".

• Contents: Uppercase letters, numbers, marks

sAdjusting the space between characters

except comma, space, pictograms

• Font style: "Normal"

• "Frame": "Off"

If the label can use the extra large font, the +

Changing the label margin

1. Press

2. Select "Margins" with

, and press

3. Select an item with

, and press

"None

: A "cut mark" will be printed. Cut the tape

with scissors.

4. Press

, and press

Adjusting the space between characters

1. Press

2. Select "Char. spacing" with

3. Select an item with

, and press

Making the width of font narrower

1. Press

2. Select "Char. width" with

, and press

3. Select "Narrow" with

, and press

or enter it, and press

Maximum length: 40cm (15.0 inch)

Lining up characters vertically

, and

1. Press

2. Select "Vertical" with

, and press

3. Select "On" with

, and press

Using mirror writing for the label

1. Press

2. Select "Mirror print" with

3. Select "On" with

, and press

How to use Heat Shrink Tube

or enter label length, and

This printer prints on two sizes of heat shrink tube, 203

(1/8") and 205 (3/16").

If printing on heat shrink tube is light, turn up the print

density. sBefore use

1. Set the dedicated tape.

2. Enter text, and then print on the tube.

3. Put a wire through the tube.

, and press

4. Direct hot air from an industrial-use heat gun onto

or enter label length, and

the entire surface of the tube, shrinking it to the

wire. Refer to the manual of your heat gun to use it

properly with heat shrink tube.

Creating a label including a barcode

• Enter barcodes according to their standards.

• Check the printed labels with your barcode reader to

ensure they can be correctly read.

• Supported barcode: CODE39, CODE128, ITF, CODABAR,

UPC-A, UPC-E, EAN-8, EAN-13

1. Press

2. Select an item with

, and press

3. After setting the barcode, enter the code.

or enter it, and press

Length range: 20-40 cm (8.0-15.0 inch)

, and press