Motorola JT 1000 Manual do utilizador - Página 18
Procurar online ou descarregar pdf Manual do utilizador para Rádio portátil Motorola JT 1000. Motorola JT 1000 42 páginas. Motorola jt 1000 portable radio
Imprimir página
LED, green
A
B
C
LED, red
A
B
C
18
Radio Operation
with Features (cont.)
Channel Scan
Programming "Operator-Selectable
Channel Scan"
1.
Enter the scan programming mode in
one of two ways, programmed by Radio
Service Software:
• by placing the 3-position toggle switch
in the scan program position, or
• by selecting the proper side button.
An alert tone will sound and the display will
show SCAN PROGRAM.
Note: The SCAN PROGRAM display is shown
for the duration of scan programming. The
display does not indicate scan programming
status. Scan programming status is indicated
by the LED.
2A. Add a non-priority scan channel to the
scan list by rotating the channel selector
to the desired channel to be added, and
press the select button. The LED will
illuminate green to indicate that the
channel is now in the scan list. Add
another non-priority scan channel to the
scan list by rotating the channel selector
to the next channel to be added. Press
the select button to enter the channel as
a non-priority channel, and again the LED
will illuminate green to indicate that the
channel is in the scan list. A total of 16
non-priority channels can be entered into
the scan list in this manner.
2B. Add a priority scan channel to the scan
list by rotating the channel selector to
the desired channel.
If the selected channel is already in the
s c a n l i s t ( L E D i l l u m i n a t e d g re e n ) ,
pressing the select button again makes
that channel the priority channel. The
LED will change from green to red.
If the selected channel is not already in
the scan list (LED off), add it by pressing
t h e s e l e c t b u t t o n . T h e L E D w i l l
illuminate.green. Press the select button
again to select this channel as the
priority channel. The LED will change
from green to red.
TM
Features (cont.)