Motorola XPR Series Cartão de referência rápida - Página 2
Procurar online ou descarregar pdf Cartão de referência rápida para Rádio portátil Motorola XPR Series. Motorola XPR Series 4 páginas. Digital portable radios
Também para Motorola XPR Series: Cartão de referência rápida (4 páginas)
Imprimir página
Audio Indicators for Programmable
Buttons
Some programmable buttons use audio
indicators to indicate the change as they
alternate between two different choices.
Programmable
Positive
Button
Indicator Tone
Currently in
Zone
Zone 2
Repeater/
Currently in
Talkaround
Talkaround mode
Start Scan
Scan
operation
Operating in
Squelch
tight squelch
Transmitting at
Power Level
low power
Tones and
All tones and
Alerts
alerts are on
Selecting a Radio Channel,
Subscriber ID, or Group ID
1
Turn the On/Off/Volume Control Knob to
power up your radio.
2
Turn the Channel Selector Knob to select the
required channel, subscriber ID, or group ID.
Capacity Plus
Turn the Channel Selector Knob clockwise or
counterclockwise to access channels with
Capacity Plus.
English
Making a Group or Private Call
NOTE: Your radio must be programmed for you
to initiate a Private Call.
Press the programmed One Touch Access
button and proceed to Step 2.
Negative
OR
Indicator Tone
Follow the procedure below.
Currently in
1
Zone 1
Turn the Channel Selector Knob to select the
channel with the active group ID.
Currently in
OR
Repeater mode
Stop Scan
Turn the Channel Selector Knob to select
operation
the channel with the active subscriber ID.
Operating in
2
Hold the radio vertically 1 to 2 inches (2.5 to
normal squelch
5.0 cm) from your mouth.
Transmitting at
high power
3
Press the PTT button to make the call. The
All tones and
LED lights up solid green.
alerts are off
4
Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5
Speak clearly into the microphone.
6
Release the PTT button to listen.
7
If the Channel Free Indication feature is
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond.
OR
If the Voice Interrupt feature is enabled,
press the PTT button to stop the current call
from the transmitting radio and free the
channel for you to talk/respond.
OR
If there is no voice activity for a
predetermined period of time, the call ends.
For a Private Call, you hear a short tone when
the call ends.
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key OR the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
Making an All Call
Your radio must be programmed to allow you to
use this feature. Users on the channel cannot
respond to an All Call.
1
Turn the Channel Selector Knob to select the
channel with the active All Call group ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3
Press the PTT button to make the call. The
LED lights up solid green.
4
Wait for the Talk Permit Tone to finish (if
enabled).
OR