Motorola H9 MINIBLUE HEADSET Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Auscultadores Motorola H9 MINIBLUE HEADSET. Motorola H9 MINIBLUE HEADSET 6 páginas. Universal bluetooth headset

Imprimir página
MAKING CALLS
Function
Toggle between two
active calls
Join a 3-way call
Put an active call on
hold or resume a call
on hold
Transfer a call from the
phone to the headset
Transfer a call from the
headset to the phone
Mute or unmute a call
Note: Some features are phone/network dependent.

AUDIO TONES

Audio Tone
Single high tone
Single medium tone
Single low tone
Single high tone
repeated every 5 sec.
Two ascending tones
Two descending tones
Four ascending tones
Four descending tones
CONTINUED
Action
Press and hold
the Call button until
you hear a medium
beep
Press and hold
both Volume buttons
until you hear a
medium beep
Press and hold the
Call button until you
hear a medium beep
Tap the Call button
Press and hold
the Call button until
you hear a low beep
Tap both Volume
buttons
CONTINUED
Headset Status
Tapping Call button
or both Volume
buttons
Pressing Call button
or both Volume
buttons for 1-2 sec.
Pressing and holding
Call button or both
Volume buttons for
greater than 2 secs.
Phone network not
available
Mute enabled
Mute disabled
Headset powering
on
Headset powering
off
MAKING CALLS
Function
Disable or enable the
indicator light
AUDIO TONES
The audio tones provide information about your
headset's status.
Audio Tone
Single high tone when
pressing Volume button
Five rapid high tones
repeated every 20 sec.
No audio indications;
deteriorating quality
Ring tone
Single very high
tone

INDICATOR LIGHTS

Indicator lights provide information about your
headset and charger base status.
Charger Base
Indicator
Charger Battery On
( - )
Flashing Battery low
Off
Headset Battery On
( + )
Off
Headset
Indicator
Off
On (steady)
10 rapid flashes
Slow pulse
Quick flash
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
CONTINUED
Action
Press and hold
both Volume
buttons until you
hear a low beep
Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
All calls ended
Status
Charging
Charging complete
Charging
Charging complete
Status
Power off
Pairing mode
Pairing successful
Connected (on a call)
Standby (not on call)