Motorola AL 200 Manual de instalação - Página 18

Procurar online ou descarregar pdf Manual de instalação para Modem Motorola AL 200. Motorola AL 200 47 páginas. Multi-user modem

Installing the AL 200

AL 200 Cable

Connections

Wireless Computer

Connections

1-8

Folow these steps.

Steps to Connect Home RF on AL 200

Step

Connect a coaxial cable to the CABLE connector on the back of the AL 200

and to the cable termination point.

Connect the power cable to the POWER connector on the back of the AL

200.

Plug the wall-mount power supply into a standard electrical outlet.

The LEDs blink in the power-up sequence, then the POWER, S1, S2, and

S3 LEDs remain on. The PC LED goes on, or flickers rapidly, when a

computer is detected on the line.

**/Open Issue/from Mike McGovern/ AL 200 must be registerd before PC

can receive IP address/ resolve w/ Mike

Follow these steps for each computer:

Steps to Connect Home RF/USB or RF/PCMCIA Clients

Step

Connect an RF antenna/adapter to the computer's USB or PCMCIA port.

Refer to Figure 1-2.

The New Hardware Found dialog box appears; then the Add New Hardware

Wizard window.

Click Next. Follow the on-screen instructions. Windows installs the

network adapter driver and the required Windows files.

Note

This step requires the Windows disk. After loading files from the Windows

disk, remove the disk (before restarting the computer).

**Set the security ID ?/Mike/Tom

**Tell user not to follow Windws instructions--follow Symph instructions-

-for driver install??

Action

The Motorola AL 200 Multi-User Modem