Motorola V.3400 Manual de operação - Página 2

Procurar online ou descarregar pdf Manual de operação para Modem Motorola V.3400. Motorola V.3400 10 páginas.

Fax Operation

MODEM INITIALIZATION

For fax operation, most fax software packages are equipped with a fax

initialization command string. Entering this command sets the active

profile for fax operation. In some cases certain options should be modi-

fied for particular requirements. The fax software manual provides

information about requirements.

Factory defaults along with the initialization command support fax

operation. Some initialization commands include the default command

&F and will reissue it for each fax operation. Users must be aware that

some fax software packages do not include the default command or only

issue the default command when the fax software is first loaded. Subse-

quent fax operations may not reset the fax profile and if a fax required

option has been changed by the user fax operation will not work.

An example of a fax initialization command is AT&F V E S0=0

This can be interpreted as:

AT&F

S0=0

Fax Autoanswer

Some fax software takes control of autoanswer, disables autoanswer for

the modem, and answers the phone as internally programmed. Other

programs do not control autoanswer at all and require the modem to

have autoanswer enabled. The user must check the software manual for

the particular requirements and refer to Chapter 4 for manual/autoan-

swer and TALK/DATA selection. Select the necessary options for fax

operation.

9-2

Reset the active profile to the factory default.

Set response messages to digit code.

Disable local echo (off).

Disable autoanswer (off).

V.3400