Epson 2190N - FX B/W Dot-matrix Printer Manual do utilizador - Página 25
Procurar online ou descarregar pdf Manual do utilizador para Software Epson 2190N - FX B/W Dot-matrix Printer. Epson 2190N - FX B/W Dot-matrix Printer 48 páginas. Impact printers
Também para Epson 2190N - FX B/W Dot-matrix Printer: Manual (11 páginas), Especificações (2 páginas), Resumo técnico (7 páginas)
Imprimir página
9.
Reattach the front cover.
10. Turn on the printer.
11. Remove any slack in the paper by pressing the LF/FF button.
(Always remove any slack from the paper; otherwise print quality
may deteriorate.)
When the printer receives data, it will start printing at the current
position without advancing the paper. If necessary, adjust the
current position of the paper using the Micro Adjust function
(described on page 32).
Caution:
c
Never use the knob to adjust the top-of-form position; turning the
knob when the printer is on may damage it or cause it to lose the
top-of-form position.
12. Attach the printer cover by inserting the front tabs into the slots,
then lowering the cover into place. Close the paper guide cover.
13. Send a print job to the
printer. The printer starts
printing from the
top-of-form position.
After you finish printing,
open the paper guide
cover and tear off the
printed document at the
perforation nearest the
paper exit slot.
Paper Handling
25