Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Manual do utilizador - Página 21
Procurar online ou descarregar pdf Manual do utilizador para Software Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 páginas. User guide - remote configuration manager
Também para Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer: Especificações (2 páginas), Atualização do firmware (1 páginas), Manual do utilizador (15 páginas)
Imprimir página
Follow these steps to enter Default-setting mode and change the settings:
1.
Make sure paper is loaded and turn off the printer.
Caution:
c
Whenever you turn off the printer, wait at least five seconds before turning
it back on; otherwise, you may damage the printer.
2.
Turn on the printer while holding down the
setting mode. (Turning on the printer this way, you can access three menus:
the Setting [SelecType] menu, Forms w/labels, and Panel lock out.)
Note:
The instructions and current settings are printed in the language that you
selected in SelecType mode.
3.
Press the
U (
) or
Set
Tear Off
Set
or
Forms w/labels
Panel lock out
Note:
To change the printer's other settings, select the Print Settings menu and change
the settings as described for SelecType on page 18.
4.
Press the
U (
) or
D (
Item
Font
Item
to change and go to the next step.
Note:
You can scroll the menu settings by holding down the
(
) button for a few seconds.
Pitch
5.
Press the
U (
) or
Set
Tear Off
Set
options within the selected option until you find the desired setting.
Note:
You can scroll through options by holding down the
(
) button for a few seconds.
Top of Form
6.
After choosing the desired option, you can either continue to make changes
to other settings by pressing the
setting mode.
7.
When you finish selecting your settings, turn off the printer to exit Default-
setting mode and save the settings.
button to enter Default-
Font
D (
) button to select the
Top of Form
menu.
) button to select the item you want
Pitch
U (
) or
Item
Font
Item
D (
) button to select the
Top of Form
U (
) or
Set
Tear Off
D or
U button, or exit Default-
Item
Item
Locking the Control Panel Buttons
You can restrict the use of buttons on the control panel by turning on Lock-out
mode. When Lock-out mode is on, only the
work.
If you want to lock other buttons, you can use Default-setting mode to select
which buttons to lock. (See page 20 for details.)
Follow these steps to turn on Lock-out mode:
1.
Turn off the printer.
2.
Hold down both the
It beeps twice, indicating that Lock-out mode has been turned on.
To turn off Lock-out mode, repeat the steps above. The printer beeps once,
indicating that Lock-out mode has been turned off.
D
Set
D
,
, and
Pause
Load
and
buttons and turn on the printer.
Font
Pitch
Locking the Control Panel Buttons 21
buttons
Tear Off