ARID-Dry MS-1200 Instruções de instalação, operação e manutenção - Página 3
Procurar online ou descarregar pdf Instruções de instalação, operação e manutenção para Desumidificador ARID-Dry MS-1200. ARID-Dry MS-1200 13 páginas. Desiccant dehumidifier
Imprimir páginaREAD THIS MANUAL
This manual is provided for the MS-1200 dehumidifier so the user can gain a thorough
understanding of the proper set-up, operation, and maintenance. This dehumidifier is built
around tested engineering principles and has passed a thorough inspection for quality of
workmanship and function. A thorough understanding of the set-up, operation, and
maintenance of this equipment will allow it to provide maximum performance and
reliability.
PRINCIPLES OF OPERATION
The MS-1200 is a self-contained desiccant dehumidifier designed to efficiently remove
water vapor from the air. A portion of the desiccant rotor is exposed to the "process" air
effectively adsorbing moisture while the second portion of the rotor is exposed to heated
"reactivation" air effectively removing the adsorbed moisture. This process is done on a
continuous basis, providing constant dehumidified process air.
MACHINE SET-UP
Carefully remove the machine from its shipping carton.
Thoroughly inspect the machine for shipping damage. Should any damage be found,
report the damage to the freight company immediately.
Carefully place the machine on a level surface within the space to be dried.
Connect 10" hoses to the process inlets and outlets as required for the drying project.
Connect 10" hoses to the reactivation inlet and outlet as required for the drying project.
CAUTION- Do not pinch or kink the hoses. Blockage of the hoses will result in reduced
airflow and moisture removal capacity.
Check to ensure the machine is turned "off" prior to connecting power. Circuit breakers
are provided in the control enclosure. Check that they are switched "on" once power is
applied.
Connect an appropriate power cord and locking connector to the flanged inlet receptacle
provided at the rear of the machine. The cord should be connected to 220vac power with
either a 30a breaker or fuse with proper grounding for operation at "low", 50a breaker or
fuses for operation at "high".
1