Ariel AM Series Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Banheiras Ariel AM Series. Ariel AM Series 10 páginas.

C-Series Whirlpool User Manual with Bluetooth

Music Feature:

While the computer system is on, press the Music button to activate either the FM radio or Bluetooth functions. When the radio function

is selected, a "3 dB" will first show on the display panel, indicating a volume adjustment; to adjust the volume, press the

Volume/Parameter "UP" or "DOWN" buttons until desired volume is achieved. The volume adjustments span from "0" to "19" "dB" ("3 dB"

being default). After 5-seconds the display will change to a frequency reading, indicating a frequency adjustment; to adjust the

frequency, press the Volume/Parameter "UP" or "DOWN" buttons until desired frequency is found. The system will automatically use

the last frequency selected when the radio function us used again.

To search for a new radio channel, while the radio function is in the frequency mode, press and hold either the Volume/Parameter "UP"

or "DOWN" button for 2-seconds, and it will automatically search for the next radio station with a strong/steady signal.To program a

frequency into the channel memory, press the Channel Memory button; "CH=1" will display on the screen; use the Volume/Parameter

"UP" or "DOWN" buttons to select different channel numbers (1-10); press the Channel Memory button again to save the frequency to

the channel number of your selection. To select between the preset memory channels, while the radio is functioning, press the Memory

button, then press the Set button, and then use the Volume/Parameter "UP" or "DOWN" buttons.

To select the Bluetooth function, press the Music button again, cycling past Radio feature. The Bluetooth symbol will appear on the

upper portion of the display, and "bt" near the center of the display. When first turned on, the Bluetooth feature will scan for an audio

source Bluetooth device; use your audio source Bluetooth device to scan and "pair" the connection.

The Bluetooth system is named "Whirlpool"; the password is "1234". When the Bluetooth systems "pair", the Bluetooth feature will

chime, indicating they have successfully connected.

The Bluetooth feature will only play audio output, and will not accept vocal input. If there is an incoming or outgoing call during music

streaming, the music will automatically stop playing, and will automatically continue when the call is ended. To deactivate the Bluetooth

feature, press the Music button to cycle the radio feature into the 'off' position.

Once a Bluetooth device has been "paired" the system will automatically connect when both Bluetooth devices are activated. If there is

more than one device "paired" to the system, the system will randomly choose one of the devices. If the system automatically connects to

an undesired "paired" device, deactivate the Bluetooth function by pressing the Music button, then press and hold the Music button for 3-

seconds, and then the Bluetooth symbol will start to flash and the system will be placed in scan mode.

Turn off and on the Bluetooth function or open Bluetooth function on the device for connection and pairing with the "Whirlpool".

Sound volume can adjust using the parameter setting buttons set into 9 different volume levels.

Radio / Bluetooth

Page 6 / 9