Dimplex 6910470400 Manual de serviço - Página 11
Procurar online ou descarregar pdf Manual de serviço para Lareira de interior Dimplex 6910470400. Dimplex 6910470400 17 páginas.
Imprimir página
Relay Board Replacement
Tools Required: Phillips Head Screwdriver
Side Cutters
1. Follow the instructions for Preparing the Firebox for Service on page 6.
2. Remove the 4 screws that hold the electronics cover panel. (Figure 9, page 9)
3. Remove the screws that secure the L-channel (number of screws will vary by model). (Figure 11, page 10)
4. Using the semi-circle grooves in the C-channel as guides, remove the screws that secure the c-channel (number of
screws will vary by model). (Figure 12, page 10)
5. Remove the 2 screws that secure the hidden touch controls bracket. (Figure 13)
6. Remove the 4 screws located on each corner of the relay board. (Figure 15)
7. Replace the connections from the defective relay board to the new relay board, cutting any wire ties that are too
restrictive.
8. Secure the relay board using the previously removed screws.
9. Replace any wire ties that have been removed.
10. Secure the hidden touch controls assembly.
11. Secure the C-channel by inserting the screws through the semi-circle grooves.
12. Secure the L-channel. Ensure not to insert screws in the holes intended for the mirrored glass bracket(s).
13. Reinstall the electronics cover panel.
14. Reassemble the unit.
Figure 15
11