PictureMate
Insert the New Photo Cartridge
1. Shake the cartridge four or five times while it is still
wrapped in its packaging.
2. Unwrap the cartridge.
Caution: Don't touch the green circuit board. Install the photo
cartridge immediately after you remove it from its package. If
you leave a cartridge unpacked for a long time before using it,
normal printing may not be possible.
3. Make sure the lever is moved to the left before you insert
the cartridge, then carefully slide the cartridge, label side up,
into the slot.
4. Push the cartridge in slowly in the middle until you hear it
click into place lightly and feel slight resistance.
5. Hold the cartridge in place as you move the lever to the
position by sliding it in the direction shown.
Lock
6. Close the cartridge door.
7. Move the handle over to the back.
PictureMate
8 -
8. Reconnect the power cord. If you're using a computer or
external drive, reconnect the USB cable to PictureMate.
9. Turn PictureMate back on.
When PictureMate recognizes the new photo cartridge, it
starts charging the ink, and you see an ink charging
message. When charging is complete, you can begin
printing again.
Store and Display PictureMate Prints
Photos printed on PictureMate Photo Paper will give you
beautiful, long lasting images. Follow these guidelines to
ensure they will look great for years.
Store Your Prints
To avoid scratches or smudging, do not rub the printed side
of the photo.
If you stack photos, do not stack them with the printed
sides touching.
Display Your Prints
To ensure prints will last as long as possible, store them in
glass frames or photo albums.
Keep prints out of direct sunlight to prevent fading.
Let prints sit for 24 hours before framing.
Store Unused Paper
Return unused paper to the original package. Store paper away
from extreme temperatures, high humidity, and bright light.
Cleaning the Print Head
If your print quality is not as good as it used to be, your
photos are light or faint, or you are missing colors in your
prints, your PictureMate's print head nozzles may be clogged.
Follow these steps to clean the print head:
1. On the Main Menu, press
, then press
Options
4/04
or
to highlight
.
OK
More
Imprimir página