Epson PowerLite 1825 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Software Epson PowerLite 1825. Epson PowerLite 1825 14 páginas. Release of check tool for network projectors v1.00 for windows
Também para Epson PowerLite 1825: Manual do utilizador (42 páginas), Manual de operação (36 páginas), Configuração rápida (2 páginas), Manual de operação (47 páginas), Declaração de Conformidade (4 páginas), Especificação do produto (2 páginas), Lista de peças (1 páginas), Boletim de apoio ao produto (25 páginas), Boletim de apoio ao produto (38 páginas), Boletim de apoio ao produto (12 páginas), Boletim de apoio ao produto (42 páginas), Boletim de apoio ao produto (22 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (41 páginas), Boletim de apoio ao produto (34 páginas), Boletim de apoio ao produto (38 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (15 páginas), Boletim de apoio ao produto (22 páginas)

Imprimir página

PowerLite 1825

Using the Remote Control

When using the remote control, stand within 20 feet (6 meters)

of the projector. Point the remote control either at the projector

or at the screen (the projector's front sensor can detect signals

bounced off the screen). Press the button for the function you

want to use. Avoid using the remote under bright fluorescent

lamps or in direct sunlight, or the projector may not respond

properly.

Switching Between Picture Sources

If your projector is connected to more than one computer

and/or video source, you can switch between the different

sources:

❏ The easiest way to select your source is to press the

button on the remote control (or the

button on the projector) repeatedly until you see the image

you want on the screen.

❏ On the remote control, there are several

Use them to switch between equipment connected to the

port identified on each button, or to use EasyMP.

After you select a source, the screen goes dark for a moment

before the image appears.

Turning Off the Picture and Sound

You can temporarily turn off the image and sound when you

want to redirect your audience's attention. There are two ways

to do this:

❏ Press the

button on the remote control. This

A/V Mute

turns the image off and stops the sound. To turn the image

and sound back on, press the button again.

Source Search

buttons.

Source

2/08

❏ Close the A/V mute slide, as shown below:

Stopping Action

To stop the action and keep the current image on the screen,

press the

button. The sound continues.

Freeze

Note: This function pauses the image, not the sound. Because the

source continues to transmit signals, when you resume the action, it

won't be at the point you stopped it.

To restart it, press the

Freeze

Zooming Part of Your Image

You can zoom in on a portion of the image using the

buttons on the remote control.

1. Press the

button on the remote control.

E-Zoom

You see a crosshair indicating the center of the zoom-in

area.

2. Use the

pointer button to position the crosshair.

3. Continue pressing the

E-Zoom

selected area up to 4 times.

4. While the image is enlarged, you can:

❏ Use the

pointer button to move around the screen.

❏ Press the

E-Zoom

5. When done, press the Esc button to return the image to its

original size.

button again.

E-Zoom

button to enlarge the

button to zoom out.