Philips 104S CM23 GSIII Manual de serviço - Página 4

Procurar online ou descarregar pdf Manual de serviço para Monitor Philips 104S CM23 GSIII. Philips 104S CM23 GSIII 9 páginas. 14” auto scan colour monitor chassis

Imprimir página

104S CM23 GSIII

Go to cover page

Front View

For detailed information about the knobs and keys,

please refer to controls

Rear View

1.Power in - attach power cable here.

2.Video In - this is a cable which is already attached to your

monitor.Connect the other end of the cable to your PC.

Installation and Control

Front Controls

For an optimized adjustment of the picture following controls are

available at the front.

Power

1.Press this knob, the green LED lights and the power is ON.

2.Press this knob again, the green LED disappears and

the power is OFF.

Hotkeys

Contrast

Rotate to adjust the picture contrast level.

Brightness

Rotate to adjust the overall screen brightness as a

compensation for ambient light.

Digital Controls

Press to adjust (increase) the function selected.

Press to adjust (decrease) the function selected.

To select the level of function.

"SHIFT" LED off - control is on first level.

"SHIFT" LED on - control is on second level.

The function pads:

H-Shift: to adjust the horizontal position of the image.

H-Size: to adjust the horizontal amplitude of the image.

V-Shift: to adjust the vertical position of the image.

V-Size: to adjust the vertical amplitude of the image.

Select level of the function pads:

Trapezoid:to correct the trapezoid distortion of the image.

Pincushion:to correct the barrel distortion of the image.

Recall: to recall original factory preset mode.

Remarks:

1.When pressing any function pad, the "Shift" LED will flash

once to indicate the function has been selected.

2.Once the limit of the adjustable range has been reached,

the shift LED will flash continuously.

Adjustment

For the monitor is pre-set with 6 modes for optimal display size

and centering as indicated in the following table:

Mode

M01

VGA

M02

M03

VGA

M04

SVGA

M05

SVGA

M06

EVGA

The set will save the user's setting parameters automatically.

After 10 seconds of key-pad inactivity, the LED will flash twice to

indicaate the parameters being saved.

Press

to recall factory preset mode. (at second level)

Frequency

Resolution

H(KHz)

V(Hz)

640 x 400

31.5

640 x 480

31.5

640 x 480

37.5

800 x 600

46.9

800 x 600

53.7

48.3

1024 x 768

Remark

Non-interlaced