Toshiba 20A44 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para TV Toshiba 20A44. Toshiba 20A44 33 páginas. Toshiba color television owner's manual 20a44
Também para Toshiba 20A44: Manual de serviço (4 páginas), Manual de serviço (41 páginas)

Imprimir página

ANTENNA/CATV CONNECTIONS

Choose one of the following seven connections, based on your

equipment and service:

Combination VHF/UHF antenna

Single 75 ohm cable

(or)

Single 300 ohm twin-lead wire*

For best performance, if you have a splitter connected, remove

the splitter and connect the single wire to the transformer,

and then to the TV's antenna input (as illustrated here).

Separate VHF and UHF antennas or

Combination VHF/UHF antenna with separate cables/wires

UHF Antenna

300 ohm twin-lead wire

VHF Antenna

75 ohm cable

(or)

UHF Antenna

300 ohm twin-lead wire

VHF Antenna

300 ohm twin-lead wire*

Cable TV service

From cable

TV service

(or)

From cable

CONVERTER/ DESCRAMBLER

TV service

(or)

CONVERTER/ DESCRAMBLER

From cable

SPLITTER

TV service

CONNECTION TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features

of each component. Check the owner's manual provided with each component for the location of video and audio inputs and outputs.

The following connection diagrams are offered as suggestions. You may need to modify them to accommodate your particular

assortment of components.

TV/VIDEO SELECTION

To view the picture from a VCR, camcorder, or TV game, you

must put the TV in VIDEO mode first. Press TV/VIDEO to

select VIDEO mode. The word "VIDEO1" or "VIDEO2"

displays briefly on-screen. Press TV/VIDEO again to return to

TV mode.

VIDEO 1

VIDEO 2

1. To connect the TV to a VCR

VCR

To Audio/

Video OUT

3M91301A-E P02-07

To ANT input

on back of TV

To ANT input

on back of TV

TRANSFORMER

(not supplied)

To ANT input

on back of TV

COMBINER

(not supplied)

To ANT input

on back of TV

COMBINER

(not supplied)

TRANSFORMER

(not supplied)

To ANT input

on back of TV

To ANT input

on back of TV

To ANT input

on back of TV

A B

A / B SWITCH

VIDEO 1

VIDEO

Rear of TV

ANT

VIDEO

AUDIO

AUDIO (R)

AUDIO (L)

(not supplied)

Combination VHF/UHF antenna (Single 75 ohm cable or 300

ohm twin-lead wire)

Connect the 75 ohm cable from a combination VHF/UHF

antenna to the antenna jack.

If your combination antenna has a 300 ohm twin-lead wire, use

the 300-75 ohm matching transformer (not supplied).

Combination VHF/UHF antenna (Separate VHF and UHF 300

ohm twin-leads)

Connect the UHF twin-lead wire to a combiner (not supplied).

Connect the VHF twin-lead to the 300-75 ohm matching

transformer (not supplied). Attach the transformer to the

combiner. Attach the combiner to the antenna jack.

Separate VHF/UHF antennas

Connect the 75 ohm cable from the VHF antenna and the UHF

antenna twin-lead to a combiner (not supplied). Attach the

combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-lead wire, use the 300-75

ohm matching transformer (not supplied), then connect the trans-

former to the combiner.

For subscribers to basic cable TV service

For basic cable service not requiring a converter/descrambler

box, connect the CATV 75 ohm coaxial cable directly to the

antenna jack on the back of the television.

For subscribers to scrambled cable TV service

If you subscribe to a cable service which requires the use of a

converter/descrambler box, connect the incoming cable to the

converter/descrambler box and connect the output of the box to

the antenna jack on the back of the television. Follow the

connections shown left. Set the television to the output of the

converter/descrambler box (usually channel 3 or 4) and use the

converter/descrambler box to select channels.

For subscribers to unscrambled basic cable with scrambled

premium channels

If you subscribe to a cable service in which basic cable channels

are unscrambled and premium channels require the use of a

converter/descrambler box, you may wish to use a two-set signal

splitter (sometimes called a "two-set coupler") and an A/B switch

box from the cable installer or an electronics supply store. Follow

the connections shown left. With the switch in the "B" position, you

can directly tune any nonscrambled channels on your TV. With

the switch in the "A" position, tune your TV to the output of the

converter/descrambler box (usually channel 3 or 4) and use the

box to tune scrambled channels.

This television has an extended tuning range and can tune most

cable channels without using a cable company supplied

converter box. Some cable companies offer "premium pay

channels" in which the signal is scrambled. Descrambling these

signals for normal viewing requires the use of a descrambler

device which is generally provided by the cable company.

2. To connect the TV to a VIDEO Game

The TV also can be used as a display device for many video

games. However, due to the wide variety of different types of

signal generated by these devices and subsequent hook-up

variations required, they have not all been included in the

suggested connection diagrams. You will need to consult each

component's owner's manual for additional information.

VIDEO Game

To Audio/Video

OUT

(not supplied)

3. To connect the TV to a camcorder

To playback from the camcorder, connect the camcorder to

the TV as shown.

To AV OUT jack

(not supplied)

13/2/04, 2:06

Front of

Front of TV