Epson PowerLite Home Cinema 725HD Configuração rápida
Procurar online ou descarregar pdf Configuração rápida para Software Epson PowerLite Home Cinema 725HD. Epson PowerLite Home Cinema 725HD 4 páginas. Quick setup and warranty
Imprimir página
PowerLite
Home Cinema 725HD/730HD
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect up to 4 video devices and use the Source Search button on the
projector or remote control to switch between them.
Computer
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Note: For information on connecting the projector to your computer or other
devices (camera, USB flash drive, etc.), see the online User's Guide.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a connected
video source (DVD player, streaming device, etc.) using an HDMI cable. If you
do not use an HDMI connection, you must connect your device's audio output
to the projector's audio input.
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: If you are using an HDMI connection to the projector, you may need to
reduce the projector speaker volume to zero (0), or make sure that the correct
audio output is selected on your device.
S-Video cable
Component video
to VGA cable
HDMI cable
RCA video cable
(composite video)
HDMI cable
Audio cable
Home theater system
Video source
Surround sound
Receiver
Powered speakers
External speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button. The projector beeps, the Status light flashes
blue, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
Video cable
Projector
Video cable
Projector
power light on the projector turns blue.
power button twice, then