MSI 612BF Manual - Página 25
Procurar online ou descarregar pdf Manual para Placa-mãe MSI 612BF. MSI 612BF 45 páginas. 3d-agp vga / 3d-audio m/b for socket 370
Também para MSI 612BF: Manual do utilizador (48 páginas)
Imprimir páginaCMOS Setup Utility – Copyright © 1984 – 1998 Award Software
OnChip Primary
OnChip Secondary
IDE Primary Master PIO
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
IDE Primary Master UDMA
IDE Primary Slave
IDE Secondary Master UDMA
IDE Secondary Slave
USB Controller
USB Keyboard Support
Init Display First
AC97 Audio
AC97 Modem
IDE HDD Block Mode
Power on Funtion
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values
OnChip Primary/Secondary PCI IDE: The integrated peripheral controller contains an IDE
interface with support for two IDE channels. Select Enabled to activate each channel
separately.
The choice: Enabled, Disabled.
IDE Primary/Secondary Master/Slave PIO: The four IDE PIO (Programmed Input/Output)
fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE
interface supports. Modes 0 through 4 provide successively increased performance. In
Auto mode, the system automatically determines the best mode for each device.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA: Ultra DMA/33 implementation is possible
only if your IDE hard drive supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/33, select Auto to enable BIOS support.
The Choice: Auto, Disabled.
USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals.
The choice: Enabled, Disabled.
USB Keyboard Support: Select Enabled if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
The choice: Enabled, Disabled.
Init Display First: This item allows you to decide to active whether PCI Slot or on-chip
VGA first
Integrated Peripherals
PCI IDE
Enabled
PCI IDE
Enabled
Auto
PIO
Auto
PIO
Auto
PIO
Auto
Auto
UDMA
Auto
Auto
UDMA
Auto
Enabled
Disabled
PCI Slot
Enabled
Enabled
Enabled
BUTTON ONLY
Enabled
3F8/IRQ4
2F8/IRQ3
F6:Optimal defaults
24
Item Help
______________________
Menu Level
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/write per
sector the drive can
support
F7:Standard Defaults