MSI 612BF Manual - Página 9

Procurar online ou descarregar pdf Manual para Placa-mãe MSI 612BF. MSI 612BF 45 páginas. 3d-agp vga / 3d-audio m/b for socket 370
Também para MSI 612BF: Manual do utilizador (48 páginas)

Imprimir página

2-6 System Memory (DRAM)

This main board supports two 168-pins DIMM modules, the Max Memory Size is

256MB(512MB using 128Mb technology).

168-pin DIMM

2-7 Central Processing Unit (CPU)

2-7-1 The mainboard provides a 370-pin ZIF Socket 370. The CPU on motherboard must have

a fan attached to prevent overheating.

WARNING: Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU

and the motherboard.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and

open it by first pulling the lever sideways away from the socket then upwards to a 90-degree

right angle. Insert the CPU with the white dot as your guide. The white dot should point

towards the end of the level. The CPU has a corner pin for three of the four corners, the CPU

will only fit in the one orientation as shown as follow. With the added weight of the CPU fan, no

force is required to insert the CPU. Once completely inserted, hold down on the fan and close

the socket's lever.

IMPORTANT:

You can setting the CPU ratio and Host Frequwncy in the BIOS setup on page

2-8 Expansion Cards

You must read the documentation come with expansion card for any hardware or software

settings that may be required to setup your specific card.

DIMM 1

168-pin DIMM



168-pin DIMM

System can be

DIMM 2

Accept or Not

