Toshiba E-STUDIO 2525AC Informações - Página 19

Procurar online ou descarregar pdf Informações para Impressora tudo em um Toshiba E-STUDIO 2525AC. Toshiba E-STUDIO 2525AC 44 páginas. Multifunctional digital color systems / multifunctional digital systems

Imprimir página
Toshiba E-STUDIO 2525AC Informações

Turning On/Off

0.
This section explains how to turn the power on and off as well as the energy saving mode.
 Turning on
Press the [POWER] button.
 The equipment starts warming up. The message is displayed to inform you that the equipment is warming up. This
may take longer than normal depending on the status and condition.
 While the equipment is warming up, you can use the auto job start function. For details, see the reference below:
Copy - HOW TO MAKE COPIES - Basic Copying Procedure - Scanning the next original during copying (auto job
start)
The home screen is displayed when ready.
When turning off, you also need to shut down by pressing the [POWER] button on the control panel. For details, see
the reference below:
 P.19 "Turning off"
Log in to the equipment if you are managing this equipment with the Department Management function or User
Management function.
 P.29 "Logging in"
 Turning off
Follow the steps below. Check the following items before turning off the equipment.
 No jobs should be left in the print job list.
 The PRINT DATA lamp (blue) or the MEMORY RX lamp (green) should not be flashing. (If the equipment is shut down
while any of the above lamps are flashing, jobs in progress such as FAX reception will be aborted.)
 No computer should access the equipment over a network, such as TopAccess.
 When the [ENERGY SAVER] button (green) is on or flashing on the control panel, or the touch panel screen is still ON,
do not disconnect the power cable. Stored data may be lost or the internal storage device may be damaged.
 If you press the [POWER] button while a job is running, a message is displayed asking if you want to delete the
current job and turn off the equipment. Press [Yes] to delete the job in progress and to turn off the power. If you do
not want to turn off the power, press [No].
Press the [POWER] button.
You can then select how to turn the equipment off.
If you press [Shutdown], the screen disappears and the equipment is turned off after a short while.
Turning On/Off 19