Philips X Series Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Monitor Philips X Series. Philips X Series 49 páginas. Video wall display
Também para Philips X Series: Manual do utilizador (50 páginas), Manual de desembalagem e instalação (8 páginas)
Imprimir página
•
Only the lifetime of the display stated in this specification is guaranteed if the display is used under the proper operation
conditions.
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a
periodic screen refresh application if the unit will display unchanging static content. Uninterrupted display of still or static
images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. This is
a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will
disappear gradually over a period of time after the power has been switched off.
WARNING: Severe "burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired. This is also
not covered under the terms of your warranty.
Service:
•
The casing cover should be opened only by qualified service personnel.
•
If there is any need for repair or integration, please contact your local service center.
•
Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please
contact a technician or your local service center.
Stability Hazard.
The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the
floor/wall in accordance with the installation instructions.
Read and follow these instructions when connecting and using your display:
•
Unplug the display if you are not going to use it for an extensive period of time.
•
Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry
cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.
•
Consult a service technician if the display does not operate normally when you have followed the instructions
in this manual.
•
The casing cover should be opened only by qualified service personnel.
•
Keep the display out of direct sunlight and away from stoves or any other heat sources.
•
Remove any object that could fall into the vents or prevent proper cooling of the display's electronics.
•
Do not block the ventilation holes on the cabinet.
•
Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
•
When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before re-
attaching the power cable or DC power cord for normal operation..
•
To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive
moisture.
•
When positioning the display, make sure the power plug and outlet are easily accessible.
•
IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast
remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost image' on the
front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD
technology. In most cases the afterimage will disappear gradually over a period of time after the power has
been switched off. Be aware that the after-image symptom cannot be repaired and is not covered under
warranty.
•
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin
outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
EU Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/
EU).2009/125/EC(Erp directive).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these
harmonized standards published under Directives of Official Journal of the European Union.
ESD Warnings
When user close to the monitor may cause the equipment discharge and reboot to the display of main menu.
iii
55BDL4005X/55BDL4007X