Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Sistema estéreo Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37. Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 29 páginas. 3 cd changer with 120 watts total power logic deck and variable incredible surround
Também para Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37: Especificações (2 páginas)

Imprimir página

A AM Loop Antenna

Connection

Connect the supplied loop antenna to

the AM ANTENNA terminal. Place the

AM loop antenna far away from the

system and adjust its position for the

best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna

to the FM ANTENNA 300

terminal.

Adjust the position of the FM antenna

for the best reception.

Outdoor Antenna

For better FM stereo reception,

connect an outdoor FM antenna to the

FM ANTENNA 300

terminal using a

300

dipole wire.

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the colored wire to

+ and the black wire to -.

• Connect the left speaker to Front

terminal L, with the colored wire to

+ and the black wire to -.

• Clip the stripped portion of the

speaker

wire as

12 mm

shown.

unlock

lock

pg 01-27/C71-C72/37-Eng

PREPARATION

D Rear Surround

Speakers' Connection

(for model FW-C72 only)

Connect the black (non-marked) wires

to the black REAR SURROUND

terminals and the colored (marked)

wires to the grey REAR SURROUND

terminals.

E Line Out Connection

(wireless ready)

You can connect the audio left and right

LINE OUT terminals to a optional CD

Recorder ANALOGUE IN terminals.

This allows you to record in an

analogue format.

You can also install additional optional

front active speakers away from the

system (e.g. in another room) to reduce

the inconvenience of running long

speaker wires across rooms. You can

place as many remote speakers as you

like provided they operate at the same

radio frequency. Connect the wireless

radio frequency transmitter to the LINE

OUT terminals. Place the active

speakers at your preferred location. Be

sure to follow the instructions supplied

with the active speakers.

Note:

– Availability of wireless transmitter and

its peripherals are subjected to the

approval of local authorities. Please

check with respective local safety or

approving authority.

F Connecting other

equipment to your

system

You can connect the audio left and right

OUT terminals of a TV, VCR, Laser Disc

player, DVD player or CD Recorder to

the AUX/CDR IN terminals at the rear

of the system.

G Subwoofer Out

Connection

Connect the optional active subwoofer

to the SUBWOOFER OUT terminal.

The subwoofer reproduces just the low

bass sound effect (e.g. explosions, the

rumble of spaceships, etc.). Be sure to

follow the instructions supplied with the

subwoofer.

H Digital Out Connection

You can record the digital sound from

the CD, through this output, on any

audio equipment with digital input (e.g.

CD Recorder, Digital Audio Tape (DAT)

deck, Digital to Analog Converter and

Digital Signal Processor).

12/16/99, 1:19 PM

Connect one end of the cinch cable

(not supplied) to the DIGITAL OUT

socket and the other end to the audio

equipment with digital input.When

connecting the cinch cable, make sure it

is fully inserted.

I AC Power Supply

After all other connections have been

made, connect the AC power cord to

the system and to the wall outlet.

Inserting batteries into the

Remote Control

• Insert the batteries (Type R06 or

AA) into the remote control as

shown in the battery compartment.

• To avoid damage from possible

battery leakage, remove dead

batteries or batteries that will not be

used for a long time. For

replacement, use type R06 or AA

batteries.

3139 116 19521 (ENG)