Philips 7000 series Manual do utilizador - Página 9

Imprimir página

Philips 7000 series Manual do utilizador

(POWER)

Switch the Soundbar on or off.

(MUTE)

Mute or restore volume.

HDMI ARC

Switch your source to HDMI ARC

connection.

AUX

Switch your audio source to the AUX

connection (3.5mm jack).

Pair/BT

Switch to Bluetooth mode. Press and

hold to activate the pairing function in

Bluetooth mode or disconnect the

existing paired Bluetooth device.

OPTICAL

Switch your audio source to the optical

connection.

USB

Switch to USB mode.

Select Equalizer (EQ) effect.

(PLAY/PAUSE)

Start, pause or resume play in BT/USB

mode.

(PREVIOUS/NEXT)

Skip to the previous or next track in

BT/USB mode.

VOL +/- (Soundbar's Volume)

Increase or decrease volume.

+/- (Subwoofer's Volume)

Increase or decrease the subwoofer's

volume.

Prepare the Remote control

• The provided Remote Control allows the

unit to be operated from a distance.

• Even if the Remote Control is operated

within the effective range 19.7 feet (6m),

remote control operation maybe

impossible if there are any obstacles

between the unit and the remote control.

• If the Remote Control is operated near

other products which generate infra-red

rays, or if other remote control devices

using infra-red rays are used near the unit,

it may operate incorrectly. Conversely, the

other products may operate incorrectly.

First-time use :

The unit has a pre-installed lithium battery.

Remove the protective tab to activate the

remote control battery.

Replace the Remote Control Battery

The remote control requires a 3V CR2025

Lithium battery.

1 Use tools (such as coin batteries/coins)

to catch the groove of the battery box

cover and turn counter-clockwise to

(unlock).

2 Remove the old battery, which is located

in the lid, place the new Cr2025 battery

and pay attention to the correct polarity

(+/-).

3 Use the tools to catch the groove of the

battery compartment cover and turn

clockwise to

(lock), secure it into the