Philips 7000 series Manual do utilizador - Página 6

Imprimir página

Philips 7000 series Manual do utilizador

Get started

Always follow the instructions in this chapter in

sequence.

Install batteries

The batteries can only back up clock and alarm

settings.

Caution

•

Risk of explosion! Keep the batteries away from heat,

sunshine or re. Never discard batteries in re.

•

Batteries contain chemical substances, so they should

be disposed of properly.

•

Do not mix battery types: e.g. alkaline with carbon

zinc. Only use batteries of the same type for the set.

Insert 2 AAA batteries (not provided) with

correct polarity (+/-) as illustrated.

Connect power

Caution

•

Risk of product damage! Make sure that the power

voltage corresponds to the voltage printed on the

back or underside of the clock radio.

•

Risk of electrical shock! When you unplug the power

cord, always pull the plug from the socket. Never pull

the cord.

•

Use only the AC power adapter speci ed in the

manufacturer or sold with this unit.

Note

•

The type plate is located at the bottom of the clock

radio.

Connect the power adaptor to the wall outlet.

Set time

Note

•

You can only set time in standby mode.

In standby mode, press and hold

for more than 2 seconds.

Press

TUN

<12 HR>

hour format, then press

TIME

to con rm.

Press

to set hour and

minute, then press

Press

TUN

[DD-MM-YY]

year

to con rm.

Press

TUN

FROM RADIO>

SET TIME

press

[SAVED]

is displayed and the time is set.

Turn on

Press

to turn on the clock radio.

The unit switches to the last selected

source.

To switch to standby mode, press

The real-time clock is displayed.

Note

•

This product will switch to standby mode after 15

minutes of inactivity.

SET TIME

<24 HR>

to select

SET

MIN

to set

SET TIME

to con rm.

to set date, month and

SET TIME

, then press

<UPDATE

to select

, then

to con rm.

again.