Philips 7000 series Manual do utilizador - Página 6

Imprimir página

Philips 7000 series Manual do utilizador

3 Get started

Charge the battery

Note

 Before you use your earpieces for the rst

time, place the earpiecess in the charging

case and charge the battery for 3 hours for

optimum battery capacity and lifetime.

 Use only the original USB charging cable to

avoid any damage.

 Finish your call before charging the earpieces,

as connecting the earpieces for charging will

power the earpieces o .

Charging case

Connect one end of the USB cable into

the charging case, and another end into

the power source.

The charging case starts charging.

•

Charging process is veri ed by the

white LED light next to the USB

socket on the case.

•

When the charging case is fully

charged, the light goes o .

Tip

 The charging case serves as a portable backup

battery for charging the earpieces. When the

charging case is fully charged, it supports 3 full

recharge cycle for the earpieces.

Earpieces

Place the earpieces in the charging case.

The earpieces start charging.

•

Charging process is veri ed by white

LED light on the earpiecess.

•

When the earpieces is fully charged,

the white light goes o .

Tip

 Normally, a full charge takes 2 hours (for the

earpieces or charging case).

Pair the earpieces with

your Bluetooth device at

the rst time

Auto Power on: Open the charging

capsule, the earpiecess discharged

and the blue LED indicator ash

with "power on" voice prompt.

Manual Power on: On both earpiecess

press and hold the multi-function

buttons for approxinmately 2 seconds.

02"

The LED on both earpiecess ashes

in blue for 3 times, and then it

ashes in white.

Both earpiecess are now power on

and are paired with each other.

1 second