Toshiba NTDVT006BK Manual de serviço - Página 6

Procurar online ou descarregar pdf Manual de serviço para Leitor de DVD Toshiba NTDVT006BK. Toshiba NTDVT006BK 11 páginas. Toshiba dvd player service guide ntdvt006bk

Imprimir página

portion of the lever.

11. Push the slider back and forth to confirm the

operation of the opening and closing gears.

12. Replace the 2 screws holding the loading

motor in place.

13. Replace the loading belt.

14. Slide the lift assembly into place, and replace

the 2 holding screws.

15. Manually operate the tray loading and lift

mechanisms to ensure they operate properly.

16. Set the laser slide assembly into the mechani-

cal assembly, and replace the 4 screws and

washers.

17. Insert the flex cable into the connector on the

laser slide assembly, and lock it in place.

18. Move the slide assembly back and forth to

ensure the flex cable doesn't interfere with its

operation.

19. If the flex cable doesn't allow the slide

assembly to easily reach the end of its travel,

push the flex cable down so it slides under the

metal plate of the slide assembly.

DVD REASSEMBLY

1. Reinstall the front panel circuit boards back in

the front panel.

2. Attach the front panel to the unit and replace

the screws.

3. Reinstall the component video output board.

4. Replace the laser mechanical assembly.

5. Replace the power supply.

6. Place the main board in the service position

and connect all of the flex cables.

7. Remove the solder from the shorting pad.

8. Install the disc clamp and the cross bar.

9. Replace the safety shield.

10. Slide the disc tray in and replace the locking

screws.

11. Place the main board in its normal position

with the shield surrounding it and fasten them

in place.

12. Install the cover.

TROUBLESHOOTING

Introduction

1. This section of the book covers troubleshoot-

ing the DVD player to the board level. When

voltages or waveforms are shown refer to the

appropriate connector in the service manual

or the back of this book.

2. Before removing any connectors in the player,

always remove AC power first. Failure to do

so will severely damage the player.

3. Before you take the player apart, thoroughly

check its operation and note all symptoms.

4. Be sure the audio selector switch is in the

proper position when you check out the audio.

In the left position you get AC-3 audio and no