Toshiba SD-190ESE Manual - Página 4

Procurar online ou descarregar pdf Manual para Leitor de DVD Toshiba SD-190ESE. Toshiba SD-190ESE 10 páginas. Dvd video player
Também para Toshiba SD-190ESE: Manual do Proprietário (10 páginas)

Imprimir página

Connections

Connecting to a TV

Connect the DVD video player to your TV.

For details of output sound, see

Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination

or video selector, the playback picture may be distorted as DVD video discs are copy protected.

Connecting to a TV (Using the SCART socket)

SCART lead (not supplied)

Signal flow

• Normal TV

To AV (SCART) output

• RGB monitor

To SCART input

• Make the following setting.

On-screen

See ÒOutputÓ se ect on

d sp ay

ÒOutputÓ

Normal TV/

ÒRGBÓ

RGB monitor

Connecting to a TV (Using the phono type sockets)

Signal flow

Normal TV

To audio input

To video input

To AUDIO OUT

(white/red)

(yellow)

(L:white R:red)

Audio/video lead (not supplied)

• Make the following setting.

On-screen

See ÒOutputÓ selection

display

ÒOutputÓ

Normal TV

No need to set.

Notes:

• In connecting to a TV using the SCART or video socket, do not select "Progressive" in "Output" menu. If you do it, the

SCART or video output does not feed the correct signals and you can not see any picture

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from

the wall outlet before making any connections.

• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

DVD video player away from the tuner and radio.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD video player's mains lead. If you leave the amplifier power on,

the speakers may be damaged.

• If your television set has one audio input, connect the DVD video player to a Y lead adapter (not supplied) and then connect

to your TV.

Connections

Connecting to optional equipment

You can enjoy high quality dynamic sounds by connection the DVD

video player to optional audio equipment.

For connection to your TV, see "Connecting to a TV"

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this

realistic effect in the home. You can enjoy motion picture and live concert DVD video discs w th this dynamic realistic sound by

connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you

have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-

channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Amplifier equipped with a

Dolby Digital decoder

To OPTICAL

type digital

audio input

Optical digital lead (not supplied)

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left

front speakers, a center speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to

that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

Amplifier equipped with

Dolby Surround Pro Logic

To audio input

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs

or audio CDs.

Amplifier equipped with

a DTS decoder

To OPTICAL

type digital

audio input

Optical digital lead (not supp ied)

To VIDEO OUT

(ye low)

• This section uses the following reference mark.

Front speaker

Center speaker

Rear speaker

Signal flow

! .

Sub woofer

Manufactured under license

from Dolby Laboratories.

"Dolby", "Pro Logic", and the

double-D symbol are trademarks

of Dolby Laboratories.

* Connect one or two rear

To AUDIO OUT

speakers. The output sound

from the rear speakers wi l

be monaural even if you

connect two rear speakers.

Audio lead (not supplied)

"DTS" and "DTS Dig tal Out"

are trademarks of Digital

Theater Systems, Inc.

Component video outputs/inputs

PROGRESSIVE outputs/inputs

Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video

signal. Connecting to these inputs allows you to view the highest quality pictures with less f icker.

INTERLACED outputs/inputs

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality

DVD picture playback.

Connecting to an audio system and TV equipped with component video inputs

Signal flow

To AUDIO OUT

(white)

(red)

Audio lead

(not supplied)

To P

VIDEO

OUT

To audio inputs

of the amplifier

(white)

(red)

Component video lead (not supplied)

Audio system

• Make the following setting

On-screen

display

See ÒOutputÓ selection

Interlaced inputs

ÒComponentÓ

Progressive inputs

ÒProgressiveÓ

Notes:

• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)

• In some TVs or monitors, the colour levels of the playback picture may be reduced slightly or the tint may change. In such a

case, adjust the TV or monitor for optimum performance.

Notes:

• In connecting to a TV that are not capable of reproducing a progressively scanned video signal using the component

sockets, do not select "Progressive" in "Output" menu. If you do it, the component video outputs does not feed the

correct signals and you can not see any picture

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

from the wall outlet before making any connections.

• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

DVD video player away from the tuner and radio.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD video player's mains lead. If you leave the amplifier power

on, the speakers may be damaged.

Warning

When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo

sockets. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R)

sockets of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R)

leads dangling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system

must be connected to the OPTICAL DIGITAL AUDIO OUT socket or of the DVD video player.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with

an MPEG2 audio decoder or MPEG2 audio processor.

Ampl fier equipped with an

MPEG2 audio decoder

To OPTICAL

type digital

audio input

Optical digital lead (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a dig tal audio input and

speaker system (right and left front speakers).

Amplifier equipped with

a digital audio input

To OPTICAL

type digital

audio input

Optical digital lead (not supplied)

Notes:

• DO NOT connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the AC-3 RF input of a Dolby Digital

Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the OPTICAL DIGITAL

AUDIO OUT socket of the DVD video player.

• Connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the "OPTICAL" of a Receiver or Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

from the wall outlet before making any connections.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD video player's mains lead. If you leave the amplifier power

on, the speakers may be damaged.

If the TV has the Component

input, connect the DVD video

player with the Component

lead. When using the

Component lead, do not

To wall outlet

connect the yellow video lead.

To Y

VIDEO

OUT

TV or monitor with

ColorStream

component video inputs

To Y video input

To P

video input

To P

video input