MSI MSI-8000HD Manual do operador - Página 9

Procurar online ou descarregar pdf Manual do operador para Monitor MSI MSI-8000HD. MSI MSI-8000HD 48 páginas. Rf remote display

1.3 Specifications

Accuracy

Power

Display

Operating Temp

Operating Time

Enclosure

F1, F2, and F3

Calibration

Auto-Off Mode

Units

Totalization

Set Points

Weight accuracy is dependent on the linked load unit, a Dyna-Link

or MSI Crane scale. Refer to the appropriate User Guide for

accuracy specifications. The MSI-8000 mirrors the display of the

connected device.

Battery operated by a custom Lithium Polymer cell. Not user

replaceable. Estimated number of charges is >300. Life is

prolonged with frequent recharging and not allowing the deep

discharging of the battery.

6 digit, 1 in (26 mm) numeric digits

- 40°F to +122°F (-40°C to +50°C), Rated accuracy range -10°C

to +40°C.

>24 hours typical.

NEMA 4/IP65 with charger port plug installed.

Programmable multifunction buttons for use as TEST, TOTAL,

Total Remote Devices, PEAK, TARE, NET/GROSS, VIEW TOTAL,

PRINT and High Res mode

No Calibration parameters are stored in the

However, it can be used to calibrate an RF connected scale

Prolongs battery life by turning the power off after 15, 30, 45, or

60 minutes (operator determined) of no weight activity

kg, lb, Tons (US short ton), Metric Tons, kiloNewtons (other Units

available with custom calibrations). Available units are determined

by the RF Linked Scale/Dyna-Link

Standard: Press button or Automatic; TOTAL weight up to 99999

X 1000 units

Two internal Set Points with open drain outputs, and two

ultrabright LEDs on indicator panel.

MSI-8000HD

Introduction