Philips BTM177 Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo Philips BTM177. Philips BTM177 29 páginas. Bluetooth wireless micro system
Também para Philips BTM177: Especificações (3 páginas), Manual de início rápido (4 páginas)
Imprimir página
Preparations
2
Move the antenna in different positions for
optimal reception (as far away as possible from
the TV, VCR or other radiation sources).
Speakers Connection
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-".
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Optional connection
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
Connecting a USB mass storage device
By connecting a USB mass storage device to the
Hi-Fi system, you can enjoy the device's stored
music through the powerful speakers of Hi-Fi
system.
●
Insert the USB device's USB plug into the
socket on the set.
Connecting other equipment to your
system
●
Use the supplied Aux-in cable to connect the
AUX jack (3.5mm, located on the top panel) to
an AUDIO OUT or headphone jack on an
external device (such as TV, Laser Disc player,
DVD player or CD recorder).
10
Before using the remote control
1
Pull out the plastic protective sheet.
2
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, FM).
3
Then select the desired function (for example
É, í, ë).
Replacing battery (lithium
CR2025) into the remote control
1
Push to open the battery tray.
2
Replace a new battery according to the
indicated polarity.
3
Push the battery tray back to close it.
CAUTION!
– Remove battery if they are exhausted
or will not be used for a long time.
– Batteries contain chemical substances,
so they should be disposed of properly.