Philips BTM2180 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo Philips BTM2180. Philips BTM2180 18 páginas. Bluetooth, 70w
Também para Philips BTM2180: Manual de início rápido (2 páginas), Manual do utilizador (21 páginas), Manual (2 páginas), Manual rápido (2 páginas), Especificações (2 páginas), Breve manual do utilizador (2 páginas)
Imprimir página
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
SPEAKER OUT (8 )
SPEAKER OUT (8 )
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
6
EN
FM
ANTENNA
100-240 V~50/60 Hz
AC MAINS~
FM
SPEAKER OUT (8 )
ANTENNA
Demonstrate the features
In standby mode, press and hold
seconds to demonstrate features of this device.
» The features are displayed one by one
across the display panel.
•
To turn off the demonstration, press
again.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
100-240 V~50/60 Hz
AC MAINS~
for three