Philips DCD2030 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo Philips DCD2030. Philips DCD2030 28 páginas. Philips dcd2030 micro music system user manual
Também para Philips DCD2030: Manual do utilizador (30 páginas), Manual de início rápido (2 páginas), Manual do utilizador (28 páginas), Manual de início rápido (2 páginas), Manual do utilizador (28 páginas), Ficha de especificações (3 páginas), Manual do utilizador (30 páginas)

Imprimir página
Philips DCD2030 Manual do utilizador

4 Get started

Turn on

1
Press .
» The unit switches to the last selected
source.
Note
•
If no source is played within 15 minutes, the unit
switches to standby mode.
•
If no operation is performed within 15 minutes in
standby mode, the unit switches to Eco-power standby
mode.
•
Press
to switch the unit to the last source when it
was turned off.
Demonstrate the unit's features
1. In the standby mode, press
ON" is displayed.
» This system's features are displayed one
by one.
• 
To turn off the demonstration, press
again.
Set the clock
The unit uses the 24-hour or 12-hour time
format.
1
In standby mode, press and hold PROG/
CLOCK SET for three seconds.
» "CLOCK SET" scrolls on the display.  
Then the time format [24H] or [12H]
is displayed.
2
Press
/
to select a time format. Press
PROG/CLOCK SET to store the setting.
» The hour digits blink.
3
to set the hour. Press PROG/
Press
/
CLOCK SET to store the setting.
» The minute digits blink.
EN
14
until "DEMO
4
Press PROG/CLOCK SET to confirm the 
setup.
Note
•
The number key on the remote control is deactivated
in this mode.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press FM.
» [AUTO INSTALL -- PRESS PLAY
-- STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
3
Press
.
» The unit automatically stores radio
stations with sufficient signal strength.
» After all available radio stations are
stored,   the first stored radio station is 
broadcast automatically.
Find the correct video input
channel
1
Turn on your unit.
2
Press DISC to select the disc source.
• 
Turn on the TV and switch to the
correct video-in channel.
Note
•
See the user manual of your TV for how to switch
between video-in channels.
to start
to