Toshiba TDP-EW25 Manual do Proprietário - Página 37
Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba TDP-EW25. Toshiba TDP-EW25 50 páginas. Extreme short throw projector
Também para Toshiba TDP-EW25: Especificações (2 páginas), Manual de instalação (6 páginas)
Imprimir página
Using the Network Utility (Continued)
2) Modifying the computer settings using the projector settings
•
Setting on the projector
1
Turn the projector power on.
Switch the input to Network.
2
3
Press the MENU button twice, then select Easy Connect (USB
memory) in Network Utility settings from the Setting display (2) menu
and press the
button.
When a confirmation window appears, insert the USB memory into the
4
projector.
Click Yes then press the
button.
5
The wireless LAN settings are saved to the USB memory. When successfully saved,
a message appears.
Unplug the USB memory.
6
•
Setting on the projector
7
Launch the Network Utility software
application.
8
Insert the USB memory into the computer.
9
After a confirmation message appears,
make settings.
10
When the setting is complete, the projector name of the connected
projector or the projector ID (MAC address of wired LAN) is displayed.
Note
This operation is allowed only when the Transmission mode is set to Ad hoc in the
•
projector's wireless LAN settings. Be sure to use Network Utility version 5.0.
7
Profile settings
This feature allows the user to save the computer's wireless LAN settings.
This feature is useful when you need to change wireless LAN settings according to
where you use.
Advanced setting
This feature allows the user to set details for Easy Connect settings. Make the following
settings as required in this dialog.
•
Registering profile automatically
Check this checkbox to automatically register the settings of the Easy Connect as
profile setting data.
•
Switching settings automatically at start-up
Check this checkbox to automatically switch to the last used wireless LAN settings
when launching the Network Utility.
WEB browser
Where the computer and the projector are connected over the network, bring up the
window of Projector Configuration Tool by pressing the WEB browser button.
Precautions
•
If the page is not displayed correctly, re-select the projector.
•
When the network settings are changed, the network connection is disconnected. If
you wish to reconnect, set up the computer again.
Precaution
•
The simple 1:1 connection, the USB memory connection and the profile setting may not
work normally depending on the type of the wireless LAN adapter and the wireless LAN
embedded computer. When such a case arises, use the Network Utility menu to make
necessary wireless LAN settings manually.
7