Toshiba TDP-MT500 Manual do Proprietário - Página 23
Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba TDP-MT500. Toshiba TDP-MT500 40 páginas. Home projector
Também para Toshiba TDP-MT500: Manual do Proprietário (42 páginas)
Imprimir página
C. Projection the image
Preparations:
•
Remove the lens cap.
•
Turn on power for the connected video equipment.
Main power switch
Focus ring
Zoom ring
POWER button /
POWER indicator
POWER button
SOURCE button
1 Turn "ON" the main power switch (O I).
•
When the main power switch is turned
on, the POWER indicator comes on in
orange.
•
If you turn projector off before it cools, the following operation of
the main power button may not work when the cooling fan is
running. (The POWER indicator blinks in orange.) After the fan
has stopped turning, press the power button again to turn on the
indicator in orange.
Power can not be
turned "ON" or "OFF".
2 Press the POWER ( ) button.
•
It may take about one minute for the lamp to come on.
3 Select an input signal.
•
Press one of the SOURCE buttons (VIDEO, S-VIDEO, COMPO-
NENT 1, COMPONENT 2, DVI-DIGITAL, or DVI-ANALOG
button) according to the connected input terminal.
•
Select the input signal after the video image is projected on the
screen.
•
With this projector, the input signal is selected from the input
signal sources contained in the DISPLAY menu. (See page 27
for details.)
•
Picture images of some input signals may not be projected on
POWER ON/STANDBY
the proper position of the screen. On this occasion, execute
SOURCE
DVI
C1
C2
D
COMP1
COMP2
DVI-D
"AUTO" in the RGB & COMPONENT menu of the INSTALLA-
DVI
S
V
A
S-VIDEO
VIDEO
DVI-A
TION menu. (See page 32.)
16:9
4:3
ZM
16:9
4:3
ZOOM
REAL
DYN
REAL
DYNAMIC
4 Set the projector after adjusting the projection distance to
ASPECT
2
3
1
obtain the specified image frame size.
ENTER
5 Set the projector and screen so that they are perpendicular
MENU
EXIT
to each other. (See page 15.)
•
If the projector and the screen can not be made perpendicular to
CNT
BRI
COL
TIN
CONTRAST BRIGHT
COLOR
TINT
each other, adjust the projection angle. (See page 15.)
TEM
GAM
SH
COLOR
GAMMA SHARPNESS
TEMP
LIGHT
6. Adjust the size of the projected image by turning the zoom
LIGHT
ring.
•
It is possible to change the image size by varying the distance
from the projector to the screen.
7. Adjust the focus by turning the focus ring.
VIEWING COMPUTER IMAGES
After about one minute:
Blinking in green
Lighting in orange
Lighting in green
23