Philips FW 775P Manual de instruções de utilização - Página 27
Procurar online ou descarregar pdf Manual de instruções de utilização para Sistema estéreo Philips FW 775P. Philips FW 775P 27 páginas. Philips mini hi-fi systems brochure
Também para Philips FW 775P: (sueco) Manual (34 páginas)
Imprimir página
Radio Reception
Poor radio reception
• The signal strength is too weak.
™ Adjust the antenna.
• The TV or VCR is too close to the stereo system.
™ Separate the stereo system from the TV or VCR.
™ Connect an external antenna for better reception.
"NO RDS TEXT" is displayed.
• RDS text message is not available.
™ Select another RDS station.
Tape Deck Operation
"RECORDING ACTIVE" is displayed.
• A recording is in progress.
™ Stop the recording or wait until it is finished.
"TAPE DUBBING ONLY" is displayed.
• Tape dubbing is only possible in tape mode.
™ Switch source to tape mode.
Recording or playback cannot be made or there is a
decrease in audio level.
• Dirty tape heads, capstans or pressure rollers.
™ See section on tape deck maintenance.
• Magnetic build-up in the record/playback head.
™ Use demagnetizing tape.
Recorded material sounds strange.
• Tape was recorded in one of the Dolby Pro Logic
modes.
™ Switch off Dolby Pro Logic mode when recording.
pg 001-27/FW775-765P/22-Eng
27
General
System switches to standby mode automatically
(for model FW775 only) .
• The system is operating in an extremely hot
environment or internal heat build-up is high.
™ This is not a malfunction. The system incorporates a
built-in safety feature that prevents overheating.
™ Let the system cool down, then switch on again.
System does not react when any button is pressed.
• Electrostatic discharge.
™ Press STANDBY-ON to switch the system off. Remove
the AC power plug from the wall outlet, then
reconnect and switch on the system again.
No or poor sound.
• Volume is not turned up.
™ Adjust VOLUME.
• The headphones are connected.
™ Disconnect the headphones.
• Speakers are not connected or are connected wrongly.
™ Check that the speakers are connected correctly.
™ Make sure that the stripped speaker wire is clamped.
Reversed left and right sound.
• Speakers are incorrectly connected.
™ Check the speaker connections and location.
Lack of bass sound or apparently imprecise
physical location of musical instruments.
• Speakers are incorrectly connected.
™ Check the speaker connection for proper phasing, red/
black wires to red/black terminals.
TROUBLESHOOTING
Remote control has no effect on the system.
• Wrong source is selected.
™ Select the source (CD, TUNER, etc.) before pressing
the function button (PLAY, PREV/NEXT, etc.).
• The distance to the system is too large.
™ Reduce the distance.
• Batteries are inserted incorrectly.
™ Insert the batteries with their polarities (+/- signs) as
indicated.
• Batteries are exhausted.
™ Replace the batteries.
Timer not working.
• Timer is not switched on.
™ Press CLOCK • TIMER on the system to switch on the
timer.
• Dubbing/recording is in progress.
™ Stop dubbing/recording.
System display features automatically and buttons
flashing continuously.
• Demonstration mode is switched on.
™ Press and hold STOP Ç for 3 seconds to switch off
the demonstration mode.
"UNPLUG HEADPHONES" is displayed.
• Headphones is connected.
™ Disconnect the headphones.
9/1/99, 9:38 AM
27
3139 116 17601