Toshiba TLP TLP-X2000 Manual do Proprietário - Página 13

Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba TLP TLP-X2000. Toshiba TLP TLP-X2000 31 páginas. Brochure
Também para Toshiba TLP TLP-X2000: Brochura e especificações (2 páginas), Especificações (1 páginas)

Toshiba TLP TLP-X2000 Manual do Proprietário
Connection (Continued)
Notes
• When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as
MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output.
• Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
• A computer monitor cannot accept Y/P
• The AUDIO IN terminal doubles for devices connected to COMPUTER 1 terminal and
COMPUTER 2 terminal.
• When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
• Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
• Moving pictures played back on computers using DVD software may appear unnatural if it
is projected with this projector, but it is not a malfunction.

Label locations

Remote control
TLP-X2000
TLP-XC2000
Caution – use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
/P
signals correctly.
B
R
Document camera
TLP-XC2000
24

Operations

Turning the power on and off

■ Connecting the power cord
1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a
wall or other power outlet.
The ON/STANDBY indicator will
change to orange, indicating standby
mode.
■ Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
■ Turning the power on
Press the ON/STANDBY
button.
When the beep sound is [On], the
projector beeps, the power turns on,
and the ON/STANDBY indicator lights
in green. After a moment, the start-up
screen appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Power cord connector
(Supplied)
Remote
Control panel
Control
Start-up screen
25