Toshiba TLP-MT3 Manual do Proprietário - Página 26

Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba TLP-MT3. Toshiba TLP-MT3 43 páginas. Lcd projector
Também para Toshiba TLP-MT3: Especificações (2 páginas)

Imprimir página
Toshiba TLP-MT3 Manual do Proprietário
26
Adjustments
Keystone correction
– Keystone
Preparation
• Display the image as explained in "Picture
Projection".
19
SELECT/ADJUST
ON/STANDBY
MENU
ENTER
ON/
STANDBY
CALL
RGB
VIDEO
1,7
AUTO SET
KEYSTONE
RESIZE
FREEZE
MUTE
MARKER
MENU
ENTER
-
+
RESET
RESET
1
Press MENU to display the
menu.
2
Press
ON
INPUT
LAMP
TEMP
3
Press
4
Press ENTER.
The keystone distortion is corrected
2,3,5,6
automatically. For further correction,
follow the below steps.
KEYSTONE
4
5
Press .
6
Press
distortion.
(–): To reduce the upper width.
(+): To reduce the lower width.
7
Press MENU.
The menu disappears.
or
to select
Ke y s t o n e
A u t o s e t
A d j u s t
–
+
to select "Auto set".
or
to correct the
Notes
• Pressing KEYSTONE on the remote control
can also correct the keystone distortion
20
automatically.
.
• These adjustments are stored until you turn
the power off.
• Pressing RESET will return the adjustment or
setting currently selected to default.
• Pictures may be slightly deteriorated by the
keystone correction.
0 degrees setting for the automatic
keystone correction
Depending on the operating condition such as
vibration, the distortion may be beyond the
automatic keystone correction. The horizontal
condition setting (0 degrees setting) may be
disordered. In such a case, perform the
following 0 degrees setting to correct the
distortion.
1) Place the projector on a level surface.
2) On the menu, select "Auto set" in
"Keystone".
3) Press RESET.
Notes
• Do not make the 0 degrees setting on an
inclined or unstable surface or in a shaky
place as it may not be performed properly.
• To store this setting even if the power is
turned off, follow the procedure of "Saving
data".
30