Toshiba X100U - TLP XGA LCD Projector Manual do Proprietário - Página 21

Procurar online ou descarregar pdf Manual do Proprietário para Projetor Toshiba X100U - TLP XGA LCD Projector. Toshiba X100U - TLP XGA LCD Projector 29 páginas. Mobile projector
Também para Toshiba X100U - TLP XGA LCD Projector: Especificações (2 páginas), Especificações (2 páginas)

Toshiba X100U - TLP XGA LCD Projector Manual do Proprietário
Using the menus (Continued)

The Default setting menu

This menu shows placement status and other settings.
Default setting 1 menu
Item
Auto keystone Always correct keystone distortion automatically.
No signal
Set the time to wait for the power to be turned off after the last operation is
power off
made with no input signal.
Auto input
Set whether the input with signals is only selected or not.
search
Beep
Beep when operation is made.
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto).
Lamp power
Set the lamp power.
Detailed description
[Auto input search]
[On]: Automatically searches the signals that can be
projected, and switches input from the connected
device that outputs the video signals each time
the INPUT button is pressed. The input from the
connected device that outputs no video signals is
skipped.
[Off]: Displays the Input select menu.
Toggle with
buttons and press
(The input without signals can be also selected.)
Note
In normal operation, set [Auto input search] to [On].
Set to [Off] when you want to select the input source from Input select menu, or if
the image does not appear properly.
[Power on]
If [Power on] is set to [Auto] and there is a power outage, the projector will come on
once power is restored.
[Lamp power]
When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling
fan noise gets quieter.
Description
On
On (not turned off)
30 min.
On
On
Manual
Low
Standard
Input select menu
Input select
Computer 1
Y/P
/P
1
B
R
Computer 2
Y/P
/P
2
B
R
Video
S-video
/
shows whether signal is
button.
input or not.
40
Default setting 2 menu
Item
Projection
mode
Fan mode
Off
Key lock
Off
Closed Caption Closed Caption settings.
Off
Reset all
Auto
Password
Detailed description
[Fan mode]
Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise
gets louder.) Set this option to use the projector, for example, at high altitude (over 1,500
meters above sea level).
Do not set Fan mode to [High] when using the projector at a lower altitude.
[Key lock]
Protect from operating errors by locking on the control panel buttons of the projector.
(The remote control operations are available.)
Control panel operations are locked after the setting is done, and accordingly operation
with the control panel buttons is disabled.
To release the key lock, set the [Key lock] to [Off] using remote control. Pressing
the [RETURN] button on the projector for 10 seconds also sets the [Key lock] to [Off].
(When operating the main unit, the 2 indicators of LAMP and TEMP light orange for
3 seconds, and at the same time the projector beeps.).
[Closed Caption]
Off
: Closed Caption is not displayed.
CC1-CC4 : Displays the dialogue and narration of TV programs and videos that are
(Caption) closed captioned.
T1-T4
: Displays information not related to the current program, such as weather,
(Text)
Note
Closed Caption is available for Video and S-Video input images.
This projector supports a special feature called closed captioning which allows
subtitles to be displayed at the bottom of the picture. This is pursuant to the
Regulations set forth by the US Federal Communications Commission (FCC). Due
to the different broadcasting or signaling system, it may not operate correctly in
other regions or countries where TV programs do not support closed captioning.
Closed Caption may not appear correctly depending on the signal conditions or the
recording conditions of videotapes.
If text is not available, only a black rectangle background may appear on screen.
To prevent this from appearing, set the Closed Caption to [Off].
Description
Sets projection mode in accordance with Placement Style.
(Standard)
(Rear)
Sets the cooling fan speed.
Lock the control panel buttons.
[
or
: Enter setting]
[
: Select On/Off
[
]
:Select OK to end
Press [Cancel] to return.
Press
and switch with
and
. Off/ CC1/ CC2/CC3/CC4/T1/T2/T3/T4
Press
. (The password and user logo are not reset.)
Resets all adjustments and settings to their factory settings.
Password setting
p.32
Press
.
Password registration/Password setting
stock data or the like, when it is provided by individual station.
41
p.20
(Ceiling)
(Rear ceiling)
Standard
High
]
[
: Confirm]
Yes
No