MSI S2205 2U24 Manual do utilizador - Página 30

Procurar online ou descarregar pdf Manual do utilizador para Servidor MSI S2205 2U24. MSI S2205 2U24 43 páginas.

Installing CPU & Heatsink

1. Place the processor carrier on top of the processor in the tray with their pin 1

indicators aligned. If installed properly, the CPU will snap into the carrier's side

latches and the carrier will latch firmly to it.

2. Remove the protective film at the bottom of the heatsink if any.

3. Make sure the heatsink has pre-applied thermal paste. If there isn't, you'll need to

apply thermal paste to the bottom center of the heatsink.

4. Check the heatsink for a diagonally cut corner or the #1clip on the heatsink label

if present. Align the processor Carrier's Pin 1 indicator with the heatsink's cut

corner (#1 clip), then gently press the heatsink down to engage the carrier's

latching mechanism to the heatsink at four corners.

CPU & Heatsink

Processor Carrier

(CPU Carrier)

Pin 1 indicators

⚠

Note

Please refer to the following table for the

corresponding CPU carrier.

CPU Package Type

Sapphire Rapids- SP XCC

Emerald Rapids- SP XCC

Sapphire Rapids- SP MCC

Emerald Rapids- SP MCC

Sapphire Rapids EE

Sapphire Rapids + HBM

Thermal paste

application area

CPU Carrier Code

E1A

E1B

E1C